{"title":"MRI Quench Vent Signs","description":"\u003cp\u003eSigns for the MRI quench vent outlet, the vent pipe route and the roof or courtyard around the discharge. When a superconducting magnet quenches, its liquid helium boils off and leaves through this pipe as a very cold, oxygen-poor plume. These signs keep roofers, HVAC techs, grounds crews and first responders out of the way.\u003c\/p\u003e","products":[{"product_id":"danger-mri-quench-vent-sign-suffocation-hazard-8x12-rust-resistant-aluminum-mri-suite-safety-sign-for-helium-vent-discharge-areas-by-cgap-safety","title":"DANGER MRI Quench Vent Sign – Suffocation Hazard – 8x12 Aluminum","description":"\u003cp\u003eMRI systems bring serious infrastructure with them, and the quench vent is one of the parts nobody thinks about until it matters. During a quench event, the system can vent large volumes of inert gas through dedicated piping. In the wrong conditions, that discharge can displace oxygen and create a rapid-onset breathing hazard, especially in confined, enclosed, or low-ventilation areas. When the risk is time-sensitive, the warning needs to be obvious, permanent, and placed at the point of exposure.\u003c\/p\u003e\u003cp\u003eThe CGAP Safety DANGER – MRI Quench Vent – Suffocation Hazard sign is built for healthcare facilities, imaging centers, and contractors who need clear hazard communication around MRI quench vent routing and vent termination points. The wording is intentionally direct so it works for mixed audiences: clinical staff, maintenance teams, roofers, HVAC contractors, inspectors, and emergency responders who may be on-site without MRI-specific context.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWhy buyers choose this sign\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMRI QUENCH VENT DANGER SIGN – Clearly identifies “MRI Quench Vent \/ Suffocation Hazard” to alert staff, contractors, and visitors that this location is tied to MRI quench venting infrastructure.\u003c\/li\u003e\n\u003cli\u003eOXYGEN DISPLACEMENT \/ ASPHYXIATION RISK AWARENESS – Supports facility hazard communication where vent discharge may release inert gas that can displace oxygen and create a serious breathing hazard in enclosed or poorly ventilated spaces.\u003c\/li\u003e\n\u003cli\u003eCRITICAL FOR MRI SUITES \u0026amp; FACILITY EXTERIORS – Ideal for MRI rooms, mechanical areas, roof access points, chiller yards, or exterior vent termination points where quench vent piping routes and discharges.\u003c\/li\u003e\n\u003cli\u003eREDUCES CONFUSION DURING MAINTENANCE \u0026amp; EMERGENCY RESPONSE – Helps prevent accidental entry, staging, or work positioning near vent discharge areas during service events, inspections, or emergency response activities.\u003c\/li\u003e\n\u003cli\u003e8x12 RUST-RESISTANT ALUMINUM – Manufactured from rust-resistant aluminum for long-term durability in medical environments, rooftops, and outdoor locations where cleaning, weather, and UV exposure destroy cheap signage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"cgap-more\"\u003e\n\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\n\u003cp\u003eA magnet can quench on its own, without anyone pressing a button, so a quench vent can discharge with no warning at the outlet. The gas leaves the pipe as a large, extremely cold plume that displaces breathable air around the outlet and wraps nearby workers in fog. Anyone working beside the vent on a roof has little time to react. The outlet also has to stay open: roofing material, a cover, or equipment stacked against it can force helium back toward the scan room.\u003c\/p\u003e\n\u003ch3\u003eWhere to post this sign\u003c\/h3\u003e\n\u003cp\u003eThe vent stack itself, or the guard around its outlet, should carry one, and the roof hatch nearest to it another, so anyone climbing out sees the warning before walking toward the discharge. Where the pipe ends at ground level, mark the fence or screen wall around it. Label ceiling access panels along the pipe route as well, so crews working above corridors know what the line carries.\u003c\/p\u003e\n\u003ch3\u003eWho uses this sign\u003c\/h3\u003e\n\u003cp\u003eRooftop solar installers, window washing crews that rig from the roof, snow removal crews on hospital roofs, cryogen service technicians who refill magnets, MRI siting and installation firms, architects planning imaging suites, and building engineers who control roof access.\u003c\/p\u003e\n\u003ch3\u003eRelated signs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/mri-magnet-magnet-quench-event-helium-release-asphyxiation-and-extreme-cold-hazard-evacuate-room-immediately\"\u003eDANGER MRI Magnet Quench Event Sign: Helium Release\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/mri-emergency-stop-danger-sign-magnet-quench-risk-activate-only-in-emergency-professional-facility-grade-8x12-uv-resistant-rust-resistant-aluminum-by-cgap-safety\"\u003eDANGER MRI Emergency Stop Sign: Magnet Quench Risk\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/danger-mri-zone-iii-sign-restricted-access-authorized-personnel-only-aluminum-12x8-uv-resistant-rust-resistant-by-cgap-safety\"\u003eDANGER MRI Zone III Sign: Restricted Access\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/mri-zone-signage-guide\"\u003eRead the guide: MRI suite signage, Zone I through Zone IV\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/mri-safety-signs\"\u003eShop all MRI safety signs\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CGAP Industries","offers":[{"title":"Single","offer_id":47392500220148,"sku":"CGAP-D-MRIQUENCHVENT-812","price":29.99,"currency_code":"USD","in_stock":true},{"title":"2 Pack","offer_id":68033775141108,"sku":"MRI-QUENCHVENT-SUFFOC-8x12-AL-2PK","price":59.98,"currency_code":"USD","in_stock":true},{"title":"5 Pack","offer_id":68033775173876,"sku":"MRI-QUENCHVENT-SUFFOC-8x12-AL-5PK","price":134.95,"currency_code":"USD","in_stock":true},{"title":"10 Pack","offer_id":68033775206644,"sku":"MRI-QUENCHVENT-SUFFOC-8x12-AL-10PK","price":254.9,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/danger-mri-quench-vent-sign-suffocation-hazard-8x12-rust-resistant-aluminum-mri-suite-safety-sign-for-helium-vent-discharge-areas-by-cgap-safety-7128733.png?v=1769721546"},{"product_id":"mri-magnet-magnet-quench-event-helium-release-asphyxiation-and-extreme-cold-hazard-evacuate-room-immediately","title":"DANGER MRI Magnet Quench Event Sign – Helium Release – 8x12 Aluminum","description":"\u003cp\u003eThis DANGER sign warns of the critical threat posed by an MRI magnet quench, where cryogens like liquid helium are rapidly released. This event creates an immediate risk of asphyxiation and freezing due to oxygen displacement and extreme cold.\u003c\/p\u003e\n\u003cp\u003eInstant recognition and swift evacuation are paramount during a quench emergency. This sign provides an essential visual directive for personnel and patients in such a life threatening scenario.\u003c\/p\u003e\n\u003cp\u003eCommon placements\u003cbr\u003e• Inside MRI scanner rooms\u003cbr\u003e• Near emergency quench button\u003cbr\u003e• MRI control room exits\u003cbr\u003e• Designated emergency exits\u003cbr\u003e• Main entrance to MRI suite\u003c\/p\u003e\n\u003cp\u003eIntended buyers\u003cbr\u003e• Hospital emergency preparedness\u003cbr\u003e• Radiology department heads\u003cbr\u003e• MRI equipment operators\u003cbr\u003e• Safety training coordinators\u003cbr\u003e• Facilities management\u003c\/p\u003e\n\u003cp\u003eConstruction features\u003cbr\u003e• Clear legible text with bold colors\u003cbr\u003e• Resistant to harsh cleaning agents\u003cbr\u003e• Lightweight for easy handling and mounting\u003cbr\u003e• Durable against physical impact\u003cbr\u003e• Ensures long term visibility and message retention\u003c\/p\u003e\n\u003cp\u003eOperational note: All personnel must be trained on quench procedures and emergency evacuation routes.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e• Manages high-risk access control: Clearly identifies strong magnetic field zones and reinforces restricted entry protocols to reduce accidental exposure for employees, contractors, and visitors.\u003c\/p\u003e\n\u003cp\u003e• Improves operational awareness: High-contrast professional layout and clear \"DANGER\" header provide instant hazard recognition near MRI scanners and magnet rooms to support site safety compliance.\u003c\/p\u003e\n\u003cp\u003e• Built for harsh conditions: Made from rust-resistant aluminum with UV-resistant printing for long-term outdoor and indoor durability in heat, rain, and humidity.\u003c\/p\u003e\n\u003cp\u003e• Fast, clean installation: Pre-drilled mounting holes and rounded corners support quick mounting on gates, fences, doors, walls, and equipment areas.\u003c\/p\u003e\n\u003cp\u003e• Made by CGAP Safety: CGAP Safety is an American safety manufacturer focused on durable, professional-grade facility and jobsite signage.\u003c\/p\u003e\n\u003cdiv class=\"cgap-more\"\u003e\n\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\n\u003cp\u003eDuring a quench, the magnet's liquid helium boils off rapidly and expands into an enormous volume of extremely cold gas. A quench pipe is supposed to carry it outdoors, but if that pipe leaks or is blocked, helium pours into the scan room as a white fog that pushes out oxygen and can freeze exposed skin. People caught in it can lose consciousness quickly. The instinct is to stay and help or check the equipment, so the posted instruction is blunt: bring the patient out and leave the room.\u003c\/p\u003e\n\u003ch3\u003eRelated signs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/danger-mri-quench-vent-sign-suffocation-hazard-8x12-rust-resistant-aluminum-mri-suite-safety-sign-for-helium-vent-discharge-areas-by-cgap-safety\"\u003eDANGER MRI Quench Vent Sign: Suffocation Hazard\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/mri-emergency-stop-danger-sign-magnet-quench-risk-activate-only-in-emergency-professional-facility-grade-8x12-uv-resistant-rust-resistant-aluminum-by-cgap-safety\"\u003eDANGER MRI Emergency Stop Sign: Magnet Quench Risk\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/danger-mri-zone-iii-sign-restricted-access-authorized-personnel-only-aluminum-12x8-uv-resistant-rust-resistant-by-cgap-safety\"\u003eDANGER MRI Zone III Sign: Restricted Access\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/mri-zone-signage-guide\"\u003eRead the guide: MRI suite signage, Zone I through Zone IV\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/mri-safety-signs\"\u003eShop all MRI safety signs\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":47756395282676,"sku":"CGAP-D-MRIMAGNETQUENCH-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/mri-magnet-system-danger-sign-cryogen-quench-hazard-for-medical-imaging-facilities-8x12-uv-resistant-rust-resistant-aluminum-professional-facility-grade-by-cgap-9628833.png?v=1775273167"},{"product_id":"mri-emergency-stop-danger-sign-magnet-quench-risk-activate-only-in-emergency-professional-facility-grade-8x12-uv-resistant-rust-resistant-aluminum-by-cgap-safety","title":"DANGER MRI Emergency Stop Sign – Magnet Quench Risk – 8x12 Aluminum","description":"\u003cp\u003e\u003cspan\u003eMRI emergency stop controls may initiate a magnet quench or critical system shutdown when activated. This DANGER sign reinforces the seriousness of emergency stop functions and establishes clear expectations that activation is reserved for genuine emergency conditions only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eUse this message to support MRI safety protocols, reduce accidental activation, and reinforce staff training within imaging departments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eCommon placements\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Adjacent to MRI emergency stop buttons\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Near quench controls within the magnet room\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• On control room panels\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Equipment service areas within MRI Zone IV\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Maintenance access points near magnet systems\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eIntended buyers\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Radiology directors and MRI administrators\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• MRI safety officers\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Hospital facilities managers\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Imaging center operators\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Contractors supporting MRI suite installations\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eConstruction features\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• 8x12 aluminum sign for professional facility use\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Rust-resistant aluminum substrate for long service life\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• UV-resistant printing for durable, high-contrast visibility\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Lightweight and easy to mount on walls and equipment panels\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e• Suitable for indoor medical environments\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOperational note: Ensure staff are trained on the distinction between emergency stop and magnet quench procedures in accordance with manufacturer guidelines.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMRI EMERGENCY CONTROL WARNING Clearly identifies emergency stop locations within MRI suites where activation may initiate a magnet quench event.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMAGNET QUENCH RISK Reinforces awareness of potential helium release and system shutdown consequences associated with improper activation.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eAUTHORIZED USE ONLY Establishes clear instruction that emergency stop functions are for true emergency situations only.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePROFESSIONAL FACILITY GRADE 8x12 UV-resistant printing on rust-resistant aluminum for long service life in medical environments.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eMADE BY CGAP SAFETY American safety manufacturer focused on professional hazard communication signage.\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv class=\"cgap-more\"\u003e\n\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\n\u003cp\u003eMRI suites often have stop controls that look alike but do very different things. A power shutoff halts the scanner electronics and leaves the magnet on. A quench boils off the liquid helium and collapses the field, which can take the scanner out of service for weeks and cost a great deal to restore. It is meant for true emergencies, such as a person pinned against the magnet by a metal object. A danger sign beside the control guards against a mistaken or panicked press.\u003c\/p\u003e\n\u003ch3\u003eRelated signs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/danger-mri-zone-iii-sign-restricted-access-authorized-personnel-only-aluminum-12x8-uv-resistant-rust-resistant-by-cgap-safety\"\u003eDANGER MRI Zone III Sign: Restricted Access\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/mri-controlled-area-danger-sign-pacemaker-interference-risk-for-medical-imaging-facilities-8x12-uv-resistant-rust-resistant-aluminum-professional-facility-grade-by-cgap-safety\"\u003eDANGER MRI Controlled Area Sign: Pacemaker Interference\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/mri-zone-iv-danger-sign-strong-magnetic-field-authorized-personnel-only-professional-facility-grade-8x12-uv-resistant-rust-resistant-aluminum-by-cgap-safety\"\u003eDANGER MRI Zone IV Sign: Strong Magnetic Field\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/mri-zone-signage-guide\"\u003eRead the guide: MRI suite signage, Zone I through Zone IV\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/mri-safety-signs\"\u003eShop all MRI safety signs\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":47757245120756,"sku":"CGAP-D-MRIEMERGENCYSTOPMAGNET-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/mri-emergency-stop-danger-sign-magnet-quench-risk-activate-only-in-emergency-professional-facility-grade-8x12-uv-resistant-rust-resistant-aluminum-by-cgap-safet-3694645.png?v=1775273106"},{"product_id":"danger-mobile-mri-trailer-quench-vent-sign-8x12-aluminum","title":"DANGER Mobile MRI Trailer Quench Vent Sign – Helium Can Blast From the Trailer Roof – 8x12 Aluminum","description":"\u003cp\u003eHelium Can Blast From the Trailer Roof. This DANGER Mobile MRI Trailer Quench Vent sign from CGAP Safety reads: \u003cstrong\u003eMOBILE MRI QUENCH VENT \/ HELIUM CAN BLAST FROM ROOF \/ COLD GAS AND NO OXYGEN \/ STAY OFF ROOF NEAR VENT\u003c\/strong\u003e. Written for mobile imaging providers and host hospitals.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eA quench releases a large volume of extremely cold helium from the roof vent that can freeze skin and displace oxygen around anyone on the trailer roof.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eTrailer roof ladder and roof area near the quench vent stack.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003emobile imaging service manager, host site facilities manager.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: MRI vendor quench vent requirements; ACR Manual on MR Safety; CGA P-12. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68017823875316,"sku":"CGAP-D-MOBILEMRITRAILERQUENCH-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-mobilemritrailerquench-812.jpg?v=1793615237"},{"product_id":"danger-mri-quench-pipe-sign-8x12-aluminum","title":"DANGER MRI Quench Pipe Sign – Damaged Pipe Can Flood Room With Helium – 8x12 Aluminum","description":"\u003cp\u003eDamaged Pipe Can Flood Room With Helium. This DANGER MRI Quench Pipe sign from CGAP Safety reads: \u003cstrong\u003eMRI QUENCH PIPE \/ CARRIES HELIUM TO OUTSIDE \/ DAMAGE CAN FLOOD SCAN ROOM \/ NEVER CUT MOVE OR HANG ON IT\u003c\/strong\u003e. Written for hospitals, imaging centers and outpatient MRI suites.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eA cut, crushed or disconnected quench pipe releases helium inside the building during a quench, displacing oxygen in the scan room and ceiling space.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eExposed quench pipe in ceilings, shafts and equipment rooms.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003ehospital facilities director, construction project manager.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: MRI vendor quench vent requirements; ACR Manual on MR Safety. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68017825677556,"sku":"CGAP-D-MRIQUENCHPIPE-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-mriquenchpipe-812.jpg?v=1793615258"},{"product_id":"danger-mri-quench-vent-outlet-cap-sign-8x12-aluminum","title":"DANGER MRI Quench Vent Outlet Cap Sign – Blocked Vent Forces Helium Into Scan Room – 8x12 Aluminum","description":"\u003cp\u003eBlocked Vent Forces Helium Into Scan Room. This DANGER MRI Quench Vent Outlet Cap sign from CGAP Safety reads: \u003cstrong\u003eMRI QUENCH VENT OUTLET \/ BLOCKED VENT SENDS HELIUM \/ INTO THE SCAN ROOM \/ NEVER COVER TARP OR BLOCK\u003c\/strong\u003e. Written for hospitals, imaging centers and outpatient MRI suites.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eIf roofers or crews cover, tarp or cap the vent, helium from a quench backs up into the building and can asphyxiate the patient and staff.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eQuench vent cap on the roof or wall.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003ehospital facilities director, roofing contractor.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: MRI vendor quench vent requirements; ACR Manual on MR Safety. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68017825841396,"sku":"CGAP-D-MRIQUENCHVENTOUTLETCAP-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-mriquenchventoutletcap-812.jpg?v=1793615260"},{"product_id":"danger-mri-quench-vent-roof-access-sign-8x12-aluminum","title":"DANGER MRI Quench Vent Roof Access Sign – Helium Can Discharge Without Warning – 8x12 Aluminum","description":"\u003cp\u003eHelium Can Discharge Without Warning. This DANGER MRI Quench Vent Roof Access sign from CGAP Safety reads: \u003cstrong\u003eROOF HAS MRI QUENCH VENT \/ HELIUM CAN VENT ANY TIME \/ STAY CLEAR OF VENT OUTLET \/ CALL MRI BEFORE ROOF WORK\u003c\/strong\u003e. Written for hospitals, imaging centers and outpatient MRI suites.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eA spontaneous quench can send a cold helium plume out of the vent while workers are on the roof, displacing oxygen and freezing exposed skin.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eRoof hatch, roof door and roof ladder.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003ehospital facilities director, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: MRI vendor quench vent requirements; CGA P-12. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68017826038004,"sku":"CGAP-D-MRIQUENCHVENTROOFACCES-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-mriquenchventroofacces-812.jpg?v=1793615261"},{"product_id":"danger-nmr-magnet-quench-sign-8x12-aluminum","title":"DANGER NMR Magnet Quench Sign – Helium Cloud Can Suffocate You – 8x12 Aluminum","description":"\u003cp\u003eHelium Cloud Can Suffocate You. This DANGER NMR Magnet Quench sign from CGAP Safety reads: \u003cstrong\u003eNMR MAGNET QUENCH \/ SUDDEN HELIUM RELEASE \/ LEAVE ROOM IMMEDIATELY \/ WAIT FOR ALL CLEAR TO RETURN\u003c\/strong\u003e. Written for university chemistry departments, pharma analytical labs, research institutes.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eA quench boils off the magnet's liquid helium in seconds to minutes, and research NMR magnets usually vent into the room, where the cloud can displace oxygen.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eNMR room exits and beside each magnet.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eNMR facility managers, EHS officers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: CGA P-12; NMR manufacturer emergency procedures. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68017900814580,"sku":"CGAP-D-NMRMAGNETQUENCH-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-nmrmagnetquench-812.jpg?v=1793616210"},{"product_id":"warning-mri-quench-outlet-access-sign-cgap-w02072-812","title":"WARNING MRI Quench Outlet Access Sign – Discharge Can Displace Oxygen – 8x12 Aluminum","description":"\u003cp\u003eDischarge Can Displace Oxygen. This WARNING MRI Quench Outlet Access sign from CGAP Safety reads: \u003cstrong\u003eMRI QUENCH OUTLET ACCESS \/ DISCHARGE CAN DISPLACE OXYGEN \/ KEEP CLEAR OF VENT OUTLET \/ DO NOT OBSTRUCT THE DISCHARGE\u003c\/strong\u003e. Written for hospital imaging departments, mri magnets, cryogens \u0026amp; quench vents.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eHelium discharged from a quench can fill the air near the outlet and cause loss of consciousness.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount beside the quench vent outlet.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eSafety or maintenance manager at hospital imaging departments.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.134, 1910.146; ANSI Z535.4. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68019298599156,"sku":"CGAP-W02072-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w02072-812.jpg?v=1793627116"},{"product_id":"notice-mri-quench-vent-outlet-sign-cgap-n01035-812","title":"NOTICE MRI Quench Vent Outlet Sign, Keep Outlet Clear, No Covers Or Caps, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eKeep Outlet Clear, No Covers Or Caps. This NOTICE MRI Quench Vent Outlet sign from CGAP Safety reads: \u003cstrong\u003eMRI QUENCH VENT OUTLET \/ KEEP OUTLET CLEAR \/ NO COVERS, CAPS OR SCREENS \/ OTHER THAN OEM PARTS\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps the helium vent path open so a quench discharges outside as designed and the vendor-specified outlet is not blocked by roofing or trade work.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the roof curb or parapet beside the quench vent pipe termination, facing anyone walking the roof.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ACR MR Safety guidance (quench vent inspection); magnet OEM siting specs; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68058385154292,"sku":"CGAP-N01035-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n01035-812.jpg?v=1793937969"},{"product_id":"notice-mri-quench-vent-roof-zone-sign-cgap-n01170-812","title":"NOTICE MRI Quench Vent Roof Zone Sign, Notify Imaging Before Any Roof Work, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eNotify Imaging Before Any Roof Work. This NOTICE MRI Quench Vent Roof Zone sign from CGAP Safety reads: \u003cstrong\u003eMRI QUENCH VENT ROOF ZONE \/ NOTIFY IMAGING DEPARTMENT \/ BEFORE ANY WORK ON THIS ROOF \/ NO STORAGE IN THIS ZONE\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps roofers and HVAC crews from stacking material or working against the vent outlet without the MR team knowing the vent is live.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount at the roof hatch or roof access door that opens onto the roof section where the quench vent terminates.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ACR MR Safety guidance; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68058410713332,"sku":"CGAP-N01170-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n01170-812.jpg?v=1793938174"},{"product_id":"notice-quench-vent-pipe-sign-cgap-n01305-812","title":"NOTICE Quench Vent Pipe Sign, Do Not Cut, Tap Or Modify This Pipe, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eDo Not Cut, Tap Or Modify This Pipe. This NOTICE Quench Vent Pipe sign from CGAP Safety reads: \u003cstrong\u003eQUENCH VENT PIPE \/ DO NOT CUT, TAP OR MODIFY \/ NO HANGERS OR LOADS ON PIPE \/ CHANGES BY MAGNET VENDOR ONLY\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003ePrevents contractors from treating the vent as ordinary duct, which would compromise the pressure-rated vent path and the magnet warranty.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the wall beside the quench vent pipe run in the equipment room, corridor ceiling space or chase, repeated along the run.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: Magnet OEM quench vent specifications; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68058440401140,"sku":"CGAP-N01305-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n01305-812.jpg?v=1793938385"},{"product_id":"notice-quench-vent-pipe-hangers-sign-cgap-n01440-812","title":"NOTICE Quench Vent Pipe Hangers Sign, Report Loose Or Missing Supports, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eReport Loose Or Missing Supports. This NOTICE Quench Vent Pipe Hangers sign from CGAP Safety reads: \u003cstrong\u003eQUENCH VENT PIPE HANGERS \/ REPORT LOOSE OR MISSING \/ SUPPORTS TO FACILITIES \/ INSPECT PER SCHEDULE\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps vent pipe supports and seismic bracing from going unreported so pipe joints are not stressed during a quench.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount near the pipe support hangers above the equipment room or in the chase where the vent pipe changes direction.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: Magnet OEM quench vent specifications; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68058459668724,"sku":"CGAP-N01440-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n01440-812.jpg?v=1793938605"},{"product_id":"notice-quench-vent-pipe-insulation-sign-cgap-n01575-812","title":"NOTICE Quench Vent Pipe Insulation Sign, Report Damaged Or Wet Insulation, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eReport Damaged Or Wet Insulation. This NOTICE Quench Vent Pipe Insulation sign from CGAP Safety reads: \u003cstrong\u003eQUENCH VENT PIPE INSULATION \/ REPORT DAMAGED OR WET \/ INSULATION TO FACILITIES \/ DO NOT REMOVE JACKETING\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps the vent pipe insulation intact so condensation and frost do not form on the run and damage ceilings and finishes.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the pipe run where insulation jacketing is visible in the equipment room or corridor.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: Magnet OEM quench vent specifications; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68058481754356,"sku":"CGAP-N01575-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n01575-812.jpg?v=1793938824"},{"product_id":"notice-quench-vent-burst-disc-sign-cgap-n01710-812","title":"NOTICE Quench Vent Burst Disc Sign, OEM Replacement Only, Record Date, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eOEM Replacement Only, Record Date. This NOTICE Quench Vent Burst Disc sign from CGAP Safety reads: \u003cstrong\u003eQUENCH VENT BURST DISC \/ OEM REPLACEMENT PART ONLY \/ RECORD REPLACEMENT DATE \/ ON TAG AND IN MAGNET LOG\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps a correct rated disc in the vent line and a dated record so the vendor and inspector can verify the vent assembly.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the equipment room wall beside the burst disc or diaphragm housing on the vent line.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: Magnet OEM quench vent specifications; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68058502496500,"sku":"CGAP-N01710-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n01710-812.jpg?v=1793939037"},{"product_id":"notice-quench-vent-roof-penetration-sign-cgap-n02045-812","title":"NOTICE Quench Vent Roof Penetration Sign, Keep Flashing And Boot Sealed, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eKeep Flashing And Boot Sealed. This NOTICE Quench Vent Roof Penetration sign from CGAP Safety reads: \u003cstrong\u003eQUENCH VENT ROOF PENETRATION \/ KEEP FLASHING AND BOOT SEALED \/ INSPECT AFTER ROOF WORK \/ REPORT LEAKS TO FACILITIES\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003ePrevents roof leaks into the magnet room ceiling after roofing or storm damage and keeps the penetration seal on the inspection list.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the roof beside the vent pipe penetration or on the pipe boot curb.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: Site practice; roofing manufacturer flashing details. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68058756841716,"sku":"CGAP-N02045-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n02045-812.jpg?v=1793940890"},{"product_id":"notice-quench-vent-annual-inspection-sign-cgap-n02180-812","title":"NOTICE Quench Vent Annual Inspection Sign, Record Date And Inspector On Tag, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eRecord Date And Inspector On Tag. This NOTICE Quench Vent Annual Inspection sign from CGAP Safety reads: \u003cstrong\u003eQUENCH VENT ANNUAL INSPECTION \/ RECORD DATE AND INSPECTOR \/ ON THIS TAG \/ FILE REPORT WITH MR SAFETY\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps the annual vent inspection recorded where the MR safety officer and accreditation surveyor can find it.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount beside the vent pipe in the equipment room where the inspection tag is kept.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ACR MR Safety guidance (quench vent inspection); site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68058800685300,"sku":"CGAP-N02180-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n02180-812.jpg?v=1793941081"},{"product_id":"notice-quench-vent-outlet-screen-sign-cgap-n02315-812","title":"NOTICE Quench Vent Outlet Screen Sign, Check Screen For Debris Per Schedule, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eCheck Screen For Debris Per Schedule. This NOTICE Quench Vent Outlet Screen sign from CGAP Safety reads: \u003cstrong\u003eQUENCH VENT OUTLET SCREEN \/ CHECK FOR DEBRIS AND NESTS \/ PER POSTED SCHEDULE \/ LOG RESULT WITH FACILITIES\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps leaves, nests and ice from building up on the outlet screen so the vent stays open.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the roof beside the vent outlet where the OEM screen or deflector is installed.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ACR MR Safety guidance; magnet OEM; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68058829390068,"sku":"CGAP-N02315-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n02315-812.jpg?v=1793941258"},{"product_id":"notice-quench-vent-low-point-drain-sign-cgap-n02450-812","title":"NOTICE Quench Vent Low Point Drain Sign, Keep Drain Clear, Check After Storms, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eKeep Drain Clear, Check After Storms. This NOTICE Quench Vent Low Point Drain sign from CGAP Safety reads: \u003cstrong\u003eQUENCH VENT LOW POINT DRAIN \/ KEEP DRAIN OPEN AND CLEAR \/ CHECK AFTER HEAVY RAIN \/ REPORT STANDING WATER\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003ePrevents water from pooling in the vent run, which can freeze or block the path and corrode the pipe.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount beside the low point drain or weep fitting on the quench vent run.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: Magnet OEM quench vent specifications; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68058848035060,"sku":"CGAP-N02450-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n02450-812.jpg?v=1793941462"},{"product_id":"notice-quench-vent-firestop-sign-cgap-n02585-812","title":"NOTICE Quench Vent Firestop Sign, Keep Firestopping Intact At Wall, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eKeep Firestopping Intact At Wall. This NOTICE Quench Vent Firestop sign from CGAP Safety reads: \u003cstrong\u003eQUENCH VENT WALL PENETRATION \/ KEEP FIRESTOPPING INTACT \/ RESEAL AFTER ANY WORK \/ REPORT GAPS TO FACILITIES\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps the rated assembly sealed after trades work around the pipe so life safety surveys do not find open penetrations.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount beside each rated wall or floor penetration of the quench vent pipe.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: NFPA 101 and local fire code (penetration firestopping); site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68058870644980,"sku":"CGAP-N02585-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n02585-812.jpg?v=1793941663"},{"product_id":"notice-quench-vent-roof-walkway-sign-cgap-n02720-812","title":"NOTICE Quench Vent Roof Walkway Sign, Do Not Step On Or Lean On Vent Pipe, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eDo Not Step On Or Lean On Vent Pipe. This NOTICE Quench Vent Roof Walkway sign from CGAP Safety reads: \u003cstrong\u003eQUENCH VENT ROOF WALKWAY \/ DO NOT STEP ON OR LEAN \/ LADDERS AND TOOLS \/ ON THE VENT PIPE\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eProtects the vent pipe joints from damage by roof traffic and equipment staging.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount along the roof walkway pads where the vent pipe runs horizontally to its termination.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: Site practice; magnet OEM. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68058889060596,"sku":"CGAP-N02720-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n02720-812.jpg?v=1793941872"},{"product_id":"notice-quench-vent-pipe-construction-cap-sign-cgap-n03055-812","title":"NOTICE Quench Vent Pipe Construction Cap Sign, Keep Pipe Capped During Construction, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eKeep Pipe Capped During Construction. This NOTICE Quench Vent Pipe Construction Cap sign from CGAP Safety reads: \u003cstrong\u003eQUENCH VENT PIPE \/ KEEP TEMPORARY CAP ON \/ DURING CONSTRUCTION \/ REMOVE BEFORE MAGNET RAMP\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps debris out of the new vent run and reminds the team the cap must come off before the magnet is energized.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on a new vent pipe stub in an MRI suite under construction or renovation.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: Magnet OEM installation specifications; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68059035238644,"sku":"CGAP-N03055-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n03055-812.jpg?v=1793943231"},{"product_id":"notice-quench-vent-pipe-pressure-test-sign-cgap-n03190-812","title":"NOTICE Quench Vent Pipe Pressure Test Sign, Vendor Pressure Test Before Ramp, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eVendor Pressure Test Before Ramp. This NOTICE Quench Vent Pipe Pressure Test sign from CGAP Safety reads: \u003cstrong\u003eQUENCH VENT PIPE \/ VENDOR PRESSURE TEST REQUIRED \/ BEFORE MAGNET RAMP \/ FILE REPORT WITH FACILITIES\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps the vent integrity test on record before the magnet is ramped so the install is not energized on an untested vent.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount in the equipment room beside the vent connection on new or reworked vent lines.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: Magnet OEM installation specifications; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68059052507380,"sku":"CGAP-N03190-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n03190-812.jpg?v=1793943442"},{"product_id":"notice-quench-vent-hood-connection-sign-cgap-n03325-812","title":"NOTICE Quench Vent Hood Connection Sign, Do Not Disconnect From Magnet, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eDo Not Disconnect From Magnet. This NOTICE Quench Vent Hood Connection sign from CGAP Safety reads: \u003cstrong\u003eQUENCH VENT HOOD CONNECTION \/ DO NOT DISCONNECT \/ FROM MAGNET TURRET \/ VENDOR SERVICE ONLY\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003ePrevents the ceiling vent connection from being disturbed by ceiling or lighting work in the magnet room.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the magnet room ceiling or wall near the flexible vent connection above the magnet turret.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: Magnet OEM quench vent specifications; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68059089207540,"sku":"CGAP-N03325-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n03325-812.jpg?v=1793943662"},{"product_id":"notice-mobile-mri-quench-vent-sign-cgap-n03460-812","title":"NOTICE Mobile MRI Quench Vent Sign, No Parking Or Standing Under Vent, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eNo Parking Or Standing Under Vent. This NOTICE Mobile MRI Quench Vent sign from CGAP Safety reads: \u003cstrong\u003eMOBILE MRI QUENCH VENT \/ NO PARKING UNDER VENT OUTLET \/ KEEP VENT SIDE CLEAR \/ NOTIFY IMAGING BEFORE ANY WORK\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps vehicles and carts out of the vent discharge zone beside a parked mobile unit.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the mobile MRI pad bollard or canopy post on the vent side of the trailer.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: Mobile MRI provider siting requirements; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68059117125876,"sku":"CGAP-N03460-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n03460-812.jpg?v=1793943859"},{"product_id":"notice-magnet-room-post-quench-sign-cgap-n04605-812","title":"NOTICE Magnet Room Post-Quench Sign, After A Quench Open Door, Call Vendor, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eAfter A Quench Open Door, Call Vendor. This NOTICE Magnet Room Post-Quench sign from CGAP Safety reads: \u003cstrong\u003eMAGNET ROOM POST-QUENCH \/ OPEN ROOM DOOR FULLY \/ START EXHAUST, CALL VENDOR \/ LOG TIME AND NAME\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eGives staff the sequence to protect the scanner and get the vendor on site fast after a quench, and records the event.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount inside the control room beside the magnet room door at eye level.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ACR MR Safety guidance; magnet OEM; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68059713994996,"sku":"CGAP-N04605-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n04605-812.jpg?v=1793946886"},{"product_id":"notice-mri-quench-vent-pipe-sleeve-sign-cgap-n07500-812","title":"NOTICE MRI Quench Vent Pipe Sleeve Sign, No Storage Against Vent Pipe, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eNo Storage Against Vent Pipe. This NOTICE MRI Quench Vent Pipe Sleeve sign from CGAP Safety reads: \u003cstrong\u003eMRI QUENCH VENT PIPE \/ NO STORAGE AGAINST PIPE \/ KEEP PIPE SURFACE \/ FREE TO FROST AND DRAIN\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps boxes and supplies away from the pipe so frost during a quench does not soak stored items and the pipe is not damaged.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the wall of the equipment room or storage area where the vent pipe passes near shelving.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: Site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68062145216756,"sku":"CGAP-N07500-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n07500-812.jpg?v=1793952685"},{"product_id":"notice-quench-vent-pipe-roof-marking-sign-cgap-n07635-812","title":"NOTICE Quench Vent Pipe Roof Marking Sign, Vent Pipe Below Roof Deck Here, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eVent Pipe Below Roof Deck Here. This NOTICE Quench Vent Pipe Roof Marking sign from CGAP Safety reads: \u003cstrong\u003eMRI QUENCH VENT PIPE \/ RUNS BELOW ROOF DECK HERE \/ NO FASTENERS OR CORES \/ CALL FACILITIES BEFORE WORK\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, academic medical centers, mobile MRI providers and research MRI facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps roofers from driving fasteners or coring through the deck into the vent pipe.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the roof surface marker post or parapet above the concealed vent pipe run.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities managers, biomedical engineering, MRI technologists, MR safety officers, imaging center directors, roofing and HVAC contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: Site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68062187061492,"sku":"CGAP-N07635-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n07635-812.jpg?v=1793952890"},{"product_id":"notice-post-quench-parts-staging-sign-cgap-n25618-812","title":"NOTICE Post-Quench Parts Staging Sign, Drain Oil Over Drip Pan Before Wash, for Commercial Heat Treaters, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eDrain Oil Over Drip Pan Before Wash. This NOTICE Post-Quench Parts Staging sign from CGAP Safety reads: \u003cstrong\u003ePOST-QUENCH PARTS STAGING \/ DRAIN OIL OVER THE DRIP PAN \/ BEFORE MOVING TO WASH \/ KEEP PAN EMPTIED\u003c\/strong\u003e. Written for commercial heat treaters, captive heat treat departments, forge shops, gear manufacturers, induction hardening shops, fastener plants.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps quench oil off the floor and out of the washer as parts move to cleaning.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the wall at the drip pan staging spot.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHeat treat supervisors, quench line operators, maintenance leads, metallurgical lab technicians, commercial heat treater safety managers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: EPA SPCC practice; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68067512320244,"sku":"CGAP-N25618-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n25618-812.jpg?v=1794002959"},{"product_id":"notice-post-quench-parts-washer-sign-cgap-n25747-812","title":"NOTICE Post-Quench Parts Washer Sign, Skim Oil Before Changing Wash Water, for Commercial Heat Treaters, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eSkim Oil Before Changing Wash Water. This NOTICE Post-Quench Parts Washer sign from CGAP Safety reads: \u003cstrong\u003ePOST-QUENCH PARTS WASHER \/ SKIM OIL BEFORE CHANGING \/ WASH WATER \/ DRAIN TO PROCESS SUMP ONLY\u003c\/strong\u003e. Written for commercial heat treaters, captive heat treat departments, forge shops, gear manufacturers, induction hardening shops, fastener plants.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps oil out of the sewer and extends wash water life.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the washer beside the drain valve.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHeat treat supervisors, quench line operators, maintenance leads, metallurgical lab technicians, commercial heat treater safety managers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: EPA pretreatment practice; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68067524477172,"sku":"CGAP-N25747-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-n25747-812.jpg?v=1794003203"},{"product_id":"caution-mri-quench-vent-roof-crossover-sign-cgap-c01035-812","title":"CAUTION MRI Quench Vent Roof Crossover Sign, Use Crossover Steps, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eUse Crossover Steps. This CAUTION MRI Quench Vent Roof Crossover sign from CGAP Safety reads: \u003cstrong\u003eUSE CROSSOVER STEPS \/ DO NOT STEP ON VENT PIPE \/ WATCH YOUR FOOTING\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers and university medical centers.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eDirects roof visitors to cross the pipe by the steps to avoid a slip or twisted ankle for staff and visitors working at the mri quench vent roof crossover. Minor or moderate injury only.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the rail or post at the roof crossover steps over the quench vent pipe.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities engineers, MRI technologists, biomed and imaging center managers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.4 CAUTION; OSHA 1910.22 walking-working surfaces. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68076615565556,"sku":"CGAP-C01035-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-c01035-812.jpg?v=1794076682"},{"product_id":"caution-mri-quench-vent-roof-walkway-sign-cgap-c01170-812","title":"CAUTION MRI Quench Vent Roof Walkway Sign, Slippery When Wet Or Icy, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eSlippery When Wet Or Icy. This CAUTION MRI Quench Vent Roof Walkway sign from CGAP Safety reads: \u003cstrong\u003eSLIPPERY WHEN WET OR ICY \/ ROOF WALKWAY TO QUENCH VENT \/ MIND YOUR STEP\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers and university medical centers.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eWarns of a slick roof walking surface on the way to the vent terminal for staff and visitors working at the mri quench vent roof walkway. Minor or moderate injury only.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount at the start of the roof walkway leading to the quench vent terminal.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities engineers, MRI technologists, biomed and imaging center managers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.4 CAUTION; OSHA 1910.22 walking-working surfaces. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68076667273460,"sku":"CGAP-C01170-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-c01170-812.jpg?v=1794076882"},{"product_id":"caution-mri-quench-vent-roof-hatch-sign-cgap-c01305-812","title":"CAUTION MRI Quench Vent Roof Hatch Sign, Mind Your Head At Hatch, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eMind Your Head At Hatch. This CAUTION MRI Quench Vent Roof Hatch sign from CGAP Safety reads: \u003cstrong\u003eROOF HATCH TO QUENCH VENT \/ WATCH YOUR HEAD \/ WHEN CLIMBING OUT\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers and university medical centers.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003ePrevents head bumps on the hatch frame when climbing to the roof for staff and visitors working at the mri quench vent roof hatch. Minor or moderate injury only.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the wall beside the ladder under the roof hatch used to reach the quench vent.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities engineers, MRI technologists, biomed and imaging center managers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.4 CAUTION; OSHA 1910.22 walking-working surfaces. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68076707086580,"sku":"CGAP-C01305-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-c01305-812.jpg?v=1794077100"},{"product_id":"caution-mri-quench-vent-hatch-spring-arm-sign-cgap-c01440-812","title":"CAUTION MRI Quench Vent Hatch Spring Arm Sign, Spring Assist Arm, Keep Clear, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eSpring Assist Arm, Keep Clear. This CAUTION MRI Quench Vent Hatch Spring Arm sign from CGAP Safety reads: \u003cstrong\u003eSPRING ASSIST HATCH ARM \/ KEEP HANDS CLEAR \/ WHEN OPENING OR CLOSING\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers and university medical centers.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eWarns of the spring assist arm that can snap fingers during hatch use for staff and visitors working at the mri quench vent hatch spring arm. Minor or moderate injury only.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the hatch frame beside the spring assist arm of the roof hatch.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities engineers, MRI technologists, biomed and imaging center managers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.4 CAUTION; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68076712493300,"sku":"CGAP-C01440-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-c01440-812.jpg?v=1794077321"},{"product_id":"caution-mri-quench-vent-insulation-jacket-sign-cgap-c01575-812","title":"CAUTION MRI Quench Vent Insulation Jacket Sign, Sharp Metal Jacket Edges, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eSharp Metal Jacket Edges. This CAUTION MRI Quench Vent Insulation Jacket sign from CGAP Safety reads: \u003cstrong\u003eSHARP METAL JACKET EDGES \/ QUENCH VENT PIPE COVERING \/ WEAR GLOVES NEAR SEAMS\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers and university medical centers.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eProtects hands from cuts on the seams of the metal pipe jacket for staff and visitors working at the mri quench vent insulation jacket. Minor or moderate injury only.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the wall next to the metal jacketed section of the quench vent pipe.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities engineers, MRI technologists, biomed and imaging center managers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.4 CAUTION; site practice for hand protection. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68076722225396,"sku":"CGAP-C01575-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-c01575-812.jpg?v=1794077528"},{"product_id":"caution-mri-quench-vent-roof-door-sign-cgap-c01710-812","title":"CAUTION MRI Quench Vent Roof Door Sign, Wind Can Slam Door, for Hospitals, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eWind Can Slam Door. This CAUTION MRI Quench Vent Roof Door sign from CGAP Safety reads: \u003cstrong\u003eWIND CAN SLAM DOOR \/ ROOF ACCESS DOOR \/ HOLD DOOR WHEN OPENING\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers and university medical centers.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003ePrevents pinched hands and bumps when wind pushes the roof door for staff and visitors working at the mri quench vent roof door. Minor or moderate injury only.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the inside of the roof access door leading to the quench vent terminal.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHospital facilities engineers, MRI technologists, biomed and imaging center managers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.4 CAUTION; site practice. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68076734447860,"sku":"CGAP-C01710-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-c01710-812.jpg?v=1794077743"},{"product_id":"caution-post-quench-washer-drip-pan-sign-cgap-c23311-812","title":"CAUTION Post Quench Washer Drip Pan Sign, Wet Floor, Drip Pan Overflow, for Heat Treating Shops, 8x12 Rust-Resistant UV-Resistant Aluminum Pre-Drilled Safety Sign by CGAP Safety","description":"\u003cp\u003eWet Floor, Drip Pan Overflow. This CAUTION Post Quench Washer Drip Pan sign from CGAP Safety reads: \u003cstrong\u003eWET FLOOR AT WASHER EXIT \/ DRIP PAN CAN OVERFLOW \/ EMPTY PAN ON SCHEDULE \/ WIPE SPILLS\u003c\/strong\u003e. Written for heat treating shops, forges, foundries, gear and bearing manufacturers.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eWarns workers in the quench area about slipping, a minor or moderate injury risk, at the post quench washer drip pan.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount at the exit serving the post quench washer drip pan, at eye level on the approach side.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHeat treat shop safety lead, maintenance lead, quench line operator.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.4 CAUTION; OSHA 1910.22 walking-working surfaces. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68078188658932,"sku":"CGAP-C23311-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-c23311-812.jpg?v=1794109037"},{"product_id":"safety-first-quench-vent-roof-outlet-sign-cgap-i01035-812","title":"SAFETY FIRST Quench Vent Roof Outlet Sign, Keep Area Around Outlet Clear, for Hospitals, 8x12 Rust-Resistant Aluminum Sign by CGAP Safety","description":"\u003cp\u003eKeep Area Around Outlet Clear. This SAFETY FIRST Quench Vent Roof Outlet sign from CGAP Safety reads: \u003cstrong\u003eMRI QUENCH VENT OUTLET \/ KEEP THE AREA AROUND IT CLEAR \/ NO STORAGE OR EQUIPMENT HERE \/ REPORT DAMAGE TO FACILITIES\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, mobile MRI providers, university medical centers and radiology groups.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps the vent outlet open and visible so roof crews do not store gear or build around it.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the roof parapet or a post within sight of the quench vent outlet.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eImaging center managers, hospital facilities engineers, MR safety officers, MRI technologists and MR service engineers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.2 safety instruction; ACR Manual on MR Safety; magnet manufacturer site planning guidance. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68081230708980,"sku":"CGAP-I01035-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-i01035-812.jpg?v=1794151445"},{"product_id":"safety-first-quench-vent-outlet-cap-sign-cgap-i01170-812","title":"SAFETY FIRST Quench Vent Outlet Cap Sign, Check Cap And Screen In Place, for Hospitals, 8x12 Rust-Resistant Aluminum Sign by CGAP Safety","description":"\u003cp\u003eCheck Cap And Screen In Place. This SAFETY FIRST Quench Vent Outlet Cap sign from CGAP Safety reads: \u003cstrong\u003eQUENCH VENT OUTLET \/ CHECK CAP AND SCREEN \/ ARE IN PLACE AND CLEAN \/ LOG THE CHECK ON ROUNDS\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, mobile MRI providers, university medical centers and radiology groups.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003ePrompts the roof round check that the weather cap and bird screen are present and unblocked.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the roof access side of the vent outlet stack where the inspector stands.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eImaging center managers, hospital facilities engineers, MR safety officers, MRI technologists and MR service engineers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.2 safety instruction; ACR Manual on MR Safety; magnet manufacturer site planning guidance. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68081239130356,"sku":"CGAP-I01170-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-i01170-812.jpg?v=1794151636"},{"product_id":"safety-first-quench-vent-roof-access-hatch-sign-cgap-i01305-812","title":"SAFETY FIRST Quench Vent Roof Access Hatch Sign, Locate Vent Outlet Before Roof Work, for Hospitals, 8x12 Rust-Resistant Aluminum Sign by CGAP Safety","description":"\u003cp\u003eLocate Vent Outlet Before Roof Work. This SAFETY FIRST Quench Vent Roof Access Hatch sign from CGAP Safety reads: \u003cstrong\u003eROOF ACCESS HATCH \/ MRI QUENCH VENT OUTLET ON ROOF \/ CHECK ROOF PLAN FOR ITS LOCATION \/ BEFORE STARTING ANY ROOF WORK\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, mobile MRI providers, university medical centers and radiology groups.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eMakes roof contractors find the quench vent outlet on the plan before they set up equipment.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount inside the roof hatch or door at eye level where roof workers enter.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eImaging center managers, hospital facilities engineers, MR safety officers, MRI technologists and MR service engineers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.2 safety instruction; ACR Manual on MR Safety; magnet manufacturer site planning guidance. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68081249976564,"sku":"CGAP-I01305-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-i01305-812.jpg?v=1794151844"},{"product_id":"safety-first-roof-contractor-work-near-quench-vent-sign-cgap-i01440-812","title":"SAFETY FIRST Roof Contractor Work Near Quench Vent Sign, Keep Outlet Open During Roofing, for Hospitals, 8x12 Rust-Resistant Aluminum Sign by CGAP Safety","description":"\u003cp\u003eKeep Outlet Open During Roofing. This SAFETY FIRST Roof Contractor Work Near Quench Vent sign from CGAP Safety reads: \u003cstrong\u003eROOFING AND HVAC CREWS \/ KEEP THE QUENCH VENT OUTLET OPEN \/ DO NOT SEAL, COVER OR TAPE IT \/ ASK FACILITIES BEFORE WORK HERE\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, mobile MRI providers, university medical centers and radiology groups.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eProtects the vent path during roof repairs by telling crews to leave the outlet uncovered and ask first.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on a roof post or curb near the vent stack where contractors stage materials.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eImaging center managers, hospital facilities engineers, MR safety officers, MRI technologists and MR service engineers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.2 safety instruction; ACR Manual on MR Safety; magnet manufacturer site planning guidance. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68081263968500,"sku":"CGAP-I01440-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-i01440-812.jpg?v=1794152024"},{"product_id":"safety-first-quench-vent-pipe-above-ceiling-sign-cgap-i01575-812","title":"SAFETY FIRST Quench Vent Pipe Above Ceiling Sign, Call Before Cutting Or Tapping, for Hospitals, 8x12 Rust-Resistant Aluminum Sign by CGAP Safety","description":"\u003cp\u003eCall Before Cutting Or Tapping. This SAFETY FIRST Quench Vent Pipe Above Ceiling sign from CGAP Safety reads: \u003cstrong\u003eMRI QUENCH VENT PIPE \/ CALL FACILITIES BEFORE \/ CUTTING, TAPPING OR MOVING IT \/ NO NEW HOLES WITHOUT APPROVAL\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, mobile MRI providers, university medical centers and radiology groups.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eStops trades from cutting or tying into the vent pipe without approval from facilities and the MR service group.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on or beside the vent pipe at each ceiling access tile along its run.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eImaging center managers, hospital facilities engineers, MR safety officers, MRI technologists and MR service engineers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.2 safety instruction; ACR Manual on MR Safety; magnet manufacturer site planning guidance. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68081290903796,"sku":"CGAP-I01575-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-i01575-812.jpg?v=1794152243"},{"product_id":"safety-first-quench-vent-pipe-hanger-sign-cgap-i01710-812","title":"SAFETY FIRST Quench Vent Pipe Hanger Sign, Hang No Other Loads From Vent Pipe, for Hospitals, 8x12 Rust-Resistant Aluminum Sign by CGAP Safety","description":"\u003cp\u003eHang No Other Loads From Vent Pipe. This SAFETY FIRST Quench Vent Pipe Hanger sign from CGAP Safety reads: \u003cstrong\u003eQUENCH VENT PIPE \/ DO NOT HANG CABLE, DUCT OR TRAY \/ FROM THIS PIPE OR ITS HANGERS \/ USE SEPARATE SUPPORTS\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, mobile MRI providers, university medical centers and radiology groups.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps the vent pipe and its supports carrying only their own weight so joints stay tight.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the pipe or hanger rod at ceiling level where overhead trades work.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eImaging center managers, hospital facilities engineers, MR safety officers, MRI technologists and MR service engineers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.2 safety instruction; ACR Manual on MR Safety; magnet manufacturer site planning guidance. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68081313743092,"sku":"CGAP-I01710-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-i01710-812.jpg?v=1794152417"},{"product_id":"safety-first-quench-vent-pipe-magnet-room-penetration-sign-cgap-i02045-812","title":"SAFETY FIRST Quench Vent Pipe Magnet Room Penetration Sign, Check Pipe Joints And Seals, for Hospitals, 8x12 Rust-Resistant Aluminum Sign by CGAP Safety","description":"\u003cp\u003eCheck Pipe Joints And Seals. This SAFETY FIRST Quench Vent Pipe Magnet Room Penetration sign from CGAP Safety reads: \u003cstrong\u003eQUENCH PIPE AT MAGNET ROOM WALL \/ CHECK CLAMPS, JOINTS AND SEALS \/ AT EACH INSPECTION \/ REPORT LOOSE PARTS TO MR SERVICE\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, mobile MRI providers, university medical centers and radiology groups.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eGives the inspector a prompt to look at clamps and seals where the pipe leaves the magnet room.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the wall next to the pipe penetration inside the equipment room or above the ceiling.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eImaging center managers, hospital facilities engineers, MR safety officers, MRI technologists and MR service engineers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.2 safety instruction; ACR Manual on MR Safety; magnet manufacturer site planning guidance. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68081434755316,"sku":"CGAP-I02045-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-i02045-812.jpg?v=1794153409"},{"product_id":"safety-first-quench-pipe-ceiling-access-panel-sign-cgap-i02180-812","title":"SAFETY FIRST Quench Pipe Ceiling Access Panel Sign, Authorized Staff Only For Inspection, for Hospitals, 8x12 Rust-Resistant Aluminum Sign by CGAP Safety","description":"\u003cp\u003eAuthorized Staff Only For Inspection. This SAFETY FIRST Quench Pipe Ceiling Access Panel sign from CGAP Safety reads: \u003cstrong\u003eQUENCH PIPE ACCESS PANEL \/ AUTHORIZED STAFF ONLY \/ SIGN IN WITH MR LEAD FIRST \/ CLOSE AND SECURE WHEN DONE\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, mobile MRI providers, university medical centers and radiology groups.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eLimits access above the magnet room ceiling to people who check in with the MR lead.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on or next to the access panel or ceiling tile marked for the vent pipe.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eImaging center managers, hospital facilities engineers, MR safety officers, MRI technologists and MR service engineers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.2 safety instruction; ACR Manual on MR Safety; magnet manufacturer site planning guidance. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68081447928052,"sku":"CGAP-I02180-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-i02180-812.jpg?v=1794153591"},{"product_id":"safety-first-quench-vent-pipe-dedicated-run-sign-cgap-i02315-812","title":"SAFETY FIRST Quench Vent Pipe Dedicated Run Sign, Keep Vent Pipe Separate From Other Exhaust, for Hospitals, 8x12 Rust-Resistant Aluminum Sign by CGAP Safety","description":"\u003cp\u003eKeep Vent Pipe Separate From Other Exhaust. This SAFETY FIRST Quench Vent Pipe Dedicated Run sign from CGAP Safety reads: \u003cstrong\u003eMRI QUENCH VENT PIPE \/ KEEP SEPARATE FROM OTHER EXHAUST \/ DO NOT TIE IN DUCTS OR DRAINS \/ CONTACT MR SERVICE FOR CHANGES\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, mobile MRI providers, university medical centers and radiology groups.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps the quench pipe a dedicated run that other trades do not connect to.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount at the shaft or chase where the vent pipe passes through the building.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eImaging center managers, hospital facilities engineers, MR safety officers, MRI technologists and MR service engineers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.2 safety instruction; ACR Manual on MR Safety; magnet manufacturer site planning guidance. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68081464049908,"sku":"CGAP-I02315-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-i02315-812.jpg?v=1794153809"},{"product_id":"safety-first-quench-button-magnet-room-wall-sign-cgap-i02450-812","title":"SAFETY FIRST Quench Button Magnet Room Wall Sign, Know Where The Quench Button Is, for Hospitals, 8x12 Rust-Resistant Aluminum Sign by CGAP Safety","description":"\u003cp\u003eKnow Where The Quench Button Is. This SAFETY FIRST Quench Button Magnet Room Wall sign from CGAP Safety reads: \u003cstrong\u003eMAGNET ROOM QUENCH BUTTON \/ KNOW WHERE IT IS \/ USE ONLY IN A TRUE EMERGENCY \/ THEN CALL THE MR SAFETY OFFICER\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, mobile MRI providers, university medical centers and radiology groups.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eMakes every staff member aware of the magnet emergency stop location and that it is for true emergencies only.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the wall beside the quench button inside the scan room at eye level.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eImaging center managers, hospital facilities engineers, MR safety officers, MRI technologists and MR service engineers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.2 safety instruction; ACR Manual on MR Safety; magnet manufacturer site planning guidance. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68081476862196,"sku":"CGAP-I02450-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-i02450-812.jpg?v=1794154045"},{"product_id":"safety-first-quench-button-control-room-sign-cgap-i02585-812","title":"SAFETY FIRST Quench Button Control Room Sign, Keep Cover Closed Until Needed, for Hospitals, 8x12 Rust-Resistant Aluminum Sign by CGAP Safety","description":"\u003cp\u003eKeep Cover Closed Until Needed. This SAFETY FIRST Quench Button Control Room sign from CGAP Safety reads: \u003cstrong\u003eCONTROL ROOM QUENCH BUTTON \/ KEEP THE COVER CLOSED \/ LIFT COVER ONLY TO USE IT \/ REPORT ANY DAMAGED COVER\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, mobile MRI providers, university medical centers and radiology groups.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps the quench button guarded against accidental use while staying easy to find in an emergency.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the control room wall just above or beside the quench button cover.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eImaging center managers, hospital facilities engineers, MR safety officers, MRI technologists and MR service engineers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.2 safety instruction; ACR Manual on MR Safety; magnet manufacturer site planning guidance. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68081490133236,"sku":"CGAP-I02585-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-i02585-812.jpg?v=1794154237"},{"product_id":"safety-first-quench-button-after-use-sign-cgap-i02720-812","title":"SAFETY FIRST Quench Button After Use Sign, Report Every Quench To MR Service, for Hospitals, 8x12 Rust-Resistant Aluminum Sign by CGAP Safety","description":"\u003cp\u003eReport Every Quench To MR Service. This SAFETY FIRST Quench Button After Use sign from CGAP Safety reads: \u003cstrong\u003eAFTER ANY QUENCH BUTTON USE \/ CALL THE MR SAFETY OFFICER \/ AND MR SERVICE RIGHT AWAY \/ KEEP ROOM CLOSED UNTIL CLEARED\u003c\/strong\u003e. Written for hospitals, outpatient imaging centers, mobile MRI providers, university medical centers and radiology groups.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eSets the first calls and room control steps after a magnet quench so recovery is orderly.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount in the control room beside the quench button and the phone list.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eImaging center managers, hospital facilities engineers, MR safety officers, MRI technologists and MR service engineers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: ANSI Z535.2 safety instruction; ACR Manual on MR Safety; magnet manufacturer site planning guidance. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68081504059636,"sku":"CGAP-I02720-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-i02720-812.jpg?v=1794154435"},{"product_id":"safety-first-quench-vent-filters-sign-cgap-i24066-812","title":"SAFETY FIRST Quench Vent Filters Sign, Check And Clean Filters On Schedule, for Heat Treating Shops, 8x12 Rust-Resistant Aluminum Sign by CGAP Safety","description":"\u003cp\u003eCheck And Clean Filters On Schedule. This SAFETY FIRST Quench Vent Filters sign from CGAP Safety reads: \u003cstrong\u003eQUENCH VENT FILTERS \/ CHECK AND CLEAN FILTERS \/ REPORT BLOCKED FILTERS\u003c\/strong\u003e. Written for heat treating shops, forges, foundries and gear and tool manufacturers.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eKeeps vent filters checked, cleaned and blocked ones reported.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the filter housing at eye level.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eHeat treat shop safety leads, maintenance supervisors, furnace operators and foundry safety managers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards and practice to review for your site: Site practice; ANSI Z535.2 safety instruction. A sign supports your site procedures; it does not replace training or supervision.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68086780625140,"sku":"CGAP-I24066-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-i24066-812.jpg?v=1794188032"}],"url":"https:\/\/cgapindustries.com\/collections\/mri-quench-vent-signs.oembed","provider":"CGAP Safety","version":"1.0","type":"link"}