{"title":"RF and Antenna Site Signs","description":"\u003cp\u003eSigns for radio frequency exposure at rooftop antennas, cell towers, broadcast and two-way radio sites and radar installations. They tell roofers, HVAC techs and climbers where exposure can exceed safe limits and to contact the site owner before work.\u003c\/p\u003e","products":[{"product_id":"rotating-antenna-dish-danger-safety-sign-8x12-rust-resistant-aluminum-with-uv-resistant-graphics-by-cgap-safety","title":"DANGER Rotating Antenna Dish Sign – Struck-By Hazard – 8x12 Aluminum","description":"\u003cp\u003eSafeguard personnel from mechanical dangers with the CGAP Safety Danger Sign for Rotating Antenna Dishes. Large parabolic antennas, common in satellite communication, move dynamically to track satellites or scan the sky, creating significant crush and pinch points. This sign is vital for establishing a clear safety perimeter and preventing severe mechanical injuries.Essential for any site with active antenna systems, this sign vividly communicates the hazards of moving machinery. It mandates a safe clearance zone and explicitly calls for Lockout\/Tagout procedures before any service or maintenance, ensuring workers are protected from unexpected movement and upholding the highest standards of operational safety.\u003c\/p\u003e\n\u003cp\u003eCommon placements:\u003cbr\u003e• At the base of large rotating satellite dishes\u003cbr\u003e• On perimeter fencing around antenna arrays\u003cbr\u003e• Near antenna control panels\u003cbr\u003e• Entrances to antenna maintenance platforms\u003cbr\u003e• On service access points to dish mechanisms\u003c\/p\u003e\n\u003cp\u003eIntended buyers:\u003cbr\u003e• Satellite ground station facility managers\u003cbr\u003e• Teleport operators\u003cbr\u003e• Antenna installation and maintenance contractors\u003cbr\u003e• Broadcast infrastructure engineers\u003cbr\u003e• Industrial safety coordinators\u003c\/p\u003e\n\u003cp\u003eConstruction features:\u003cbr\u003e• Robust .065 rust-resistant aluminum construction endures extreme weather.\u003cbr\u003e• UV-resistant graphics maintain legibility against harsh sunlight.\u003cbr\u003e• Equipped with pre-drilled holes for rapid and secure installation.\u003cbr\u003e• Safety-focused rounded corners prevent accidental cuts.\u003cbr\u003e• Designed for maximum durability and visibility in industrial settings.\u003c\/p\u003e\n\u003cp\u003eOperational note: Always confirm antenna movement protocols and establish a clear communication plan before approaching active rotating dishes.\u003c\/p\u003e\n\u003cp\u003e• Manages high-risk access control: Clearly identifies rotating antenna dish zones and reinforces restricted entry protocols to reduce accidental exposure for employees, contractors, and visitors.\u003cbr\u003e• Improves operational awareness: High-contrast professional graphics and clear \"DANGER\" header provide instant hazard recognition near actively moving satellite dishes to support site safety compliance.\u003cbr\u003e• Built for harsh conditions: Made from rust-resistant aluminum with UV-resistant printing for long-term outdoor and indoor durability in heat, rain, and humidity.\u003cbr\u003e• Fast, clean installation: Pre-drilled mounting holes and rounded corners support quick mounting on gates, fences, doors, walls, and equipment areas.\u003cbr\u003e• Made by CGAP Safety: CGAP Safety is an American safety manufacturer focused on durable, professional-grade facility and jobsite signage.\u003c\/p\u003e\n\u003cdiv class=\"cgap-more\"\u003e\n\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\n\u003cp\u003eLarge dish antennas rotate on their pedestals and tilt as they track, often on a schedule or a command from a remote operations center, so the dish can start moving with nobody nearby at the controls. The reflector rim and counterweights sweep a wide arc, and a worker inside that arc can be struck or pinned against the structure. Some systems also drive to a stow position automatically when the wind rises. A warning at the clearance boundary keeps people out of the sweep until the drives are locked out.\u003c\/p\u003e\n\u003ch3\u003eRelated signs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/railcar-coupling-zone-danger-safety-sign-for-crush-pinch-hazards-8x12-rust-resistant-aluminum-with-uv-resistant-graphics-by-cgap-safety\"\u003eDANGER Railcar Coupling Zone Sign: Crush \u0026amp; Pinch Hazards\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/drill-rig-rotating-parts-severe-entanglement-hazard-8x12-rust-resistant-aluminum-with-uv-resistant-graphics-by-cgap-safety\"\u003eDANGER Drill Rig Rotating Parts Sign: Severe Entanglement\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/sever-hazard-danger-sign-rotating-blades-for-wood-processing-facilities-8x12-uv-resistant-rust-resistant-aluminum-professional-facility-grade-by-cgap-safety\"\u003eDANGER Sever Hazard Sign: Rotating Blades\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/machine-guarding-guide\"\u003eRead the guide: machine guarding compliance\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/cgap-safety-machine-guarding\"\u003eShop all machine guarding signs\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":47700551074036,"sku":"CGAP-D-ROTATINGANTENNADISH-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/rotating-antenna-dish-danger-safety-sign-8x12-rust-resistant-aluminum-with-uv-resistant-graphics-by-cgap-safety-1918864.png?v=1780742046"},{"product_id":"detonator-storage-danger-sign-radio-frequency-hazard-for-blasting-and-ordnance-facilities-8x12-uv-resistant-rust-resistant-aluminum-professional-facility-grade-by-cgap-safety","title":"DANGER Detonator Storage Sign – Radio Frequency Hazard – 8x12 Aluminum","description":"\u003cp\u003eWarn personnel of the critical danger posed by radio frequency signals near detonators. This DANGER sign mandates disabling all transmitters, preventing unintended detonations and ensuring utmost safety.\u003c\/p\u003e\n\u003cp\u003eEssential for sites handling blasting caps, electronic detonators, and other sensitive ignition hazard components, safeguarding lives and property.\u003c\/p\u003e\n\u003cp\u003eCommon placements\u003cbr\u003e• Detonator magazines\u003cbr\u003e• Blasting cap storage\u003cbr\u003e• Ordnance assembly areas\u003cbr\u003e• Ignition hazard testing facilities\u003cbr\u003e• Military munition depots\u003c\/p\u003e\n\u003cp\u003eIntended buyers\u003cbr\u003e• Blasting engineers\u003cbr\u003e• Ordnance technicians\u003cbr\u003e• Safety officers\u003cbr\u003e• Military personnel\u003cbr\u003e• Construction project managers\u003c\/p\u003e\n\u003cp\u003eConstruction features\u003cbr\u003e• Durable industrial grade aluminum\u003cbr\u003e• UV protected finish\u003cbr\u003e• Weather resistant construction\u003cbr\u003e• Easy mounting with pre drilled holes\u003cbr\u003e• High contrast visual warning\u003c\/p\u003e\n\u003cp\u003eOperational note: Implement strict adherence to this warning with regular monitoring and enforcement.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e• Manages high-risk access control: Clearly identifies detonator storage zones where radio frequency transmissions are prohibited and reinforces safety protocols to reduce unintended detonation risks for employees, contractors, and visitors.\u003c\/p\u003e\n\u003cp\u003e• Improves operational awareness: High-contrast professional layout and clear \"DANGER\" header provide instant hazard recognition near ignition hazard components to support site safety compliance.\u003c\/p\u003e\n\u003cp\u003e• Built for harsh conditions: Made from rust-resistant aluminum with UV-resistant printing for long-term outdoor and indoor durability in heat, rain, and humidity.\u003c\/p\u003e\n\u003cp\u003e• Fast, clean installation: Pre-drilled mounting holes and rounded corners support quick mounting on gates, fences, doors, walls, and equipment areas.\u003c\/p\u003e\n\u003cp\u003e• Made by CGAP Safety: CGAP Safety is an American safety manufacturer focused on durable, professional-grade facility and jobsite signage.\u003c\/p\u003e\n\u003cdiv class=\"cgap-more\"\u003e\n\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\n\u003cp\u003eElectric detonators fire when current flows through a fine bridge wire, and their leg wires can pick up energy from a nearby radio transmitter like an antenna. Keying a handheld radio, taking a phone call, or idling a truck with a mounted transmitter beside the magazine adds risk for no benefit, since the conversation can happen elsewhere. A posted instruction at the magazine door reminds crews to switch off radios and phones before they approach, which is easy to forget when the radio is how the crew talks.\u003c\/p\u003e\n\u003ch3\u003eRelated signs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/products\/active-blast-zone-safety-sign-for-mining-quarry-operations-8x12-rust-resistant-aluminum-with-uv-resistant-graphics-by-cgap-safety\"\u003eDANGER Active Blast Zone Sign: Mining \u0026amp; Quarry Operations\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/blasting-danger-sign-explosives-and-flying-debris-for-underground-shafts-8x12-uv-resistant-rust-resistant-aluminum-professional-facility-grade-by-cgap-safety\"\u003eDANGER Blasting Sign: Explosives and Flying Debris\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/products\/ignition-hazard-blast-zone-danger-sign-projectile-fragment-hazard-for-blasting-and-demolition-sites-8x12-uv-resistant-rust-resistant-aluminum-professional-facility-grade-by-cgap-safety\"\u003eDANGER Blast Zone Sign: Projectile Fragment Hazard\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"\/pages\/cgap-safety\"\u003eBrowse all safety signage guides\u003c\/a\u003e\u003cbr\u003e\u003ca href=\"\/collections\/mining\"\u003eShop all mining signs\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":47757469319412,"sku":"CGAP-D-DETONATORSTORAGERADIO-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/detonator-storage-danger-sign-radio-frequency-hazard-for-blasting-and-ordnance-facilities-8x12-uv-resistant-rust-resistant-aluminum-professional-facility-grade--4618770.png?v=1777924633"},{"product_id":"danger-rf-transmitter-sign-8x12-aluminum","title":"DANGER RF Transmitter Sign – Radio Frequency Energy – 8x12 Aluminum","description":"\u003cp\u003eRadio frequency energy. This DANGER RF Transmitter sign from CGAP Safety reads: RF TRANSMITTER \/ RADIO FREQUENCY ENERGY \/ STAY BACK FROM ANTENNA. Written for telecom contractors, utility crews, cell sites and fiber installers. Rust-resistant .065 aluminum, UV-resistant, pre-drilled for mounting. Made in the USA.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":67989831123188,"sku":"CGAP-D-RFTRANSMITTER-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-rftransmitter-812.jpg?v=1793303449"},{"product_id":"danger-cell-tower-base-sign-8x12-aluminum","title":"DANGER Cell Tower Base Sign – Radio Frequency Area – 8x12 Aluminum","description":"\u003cp\u003eRadio frequency area. This DANGER Cell Tower Base sign from CGAP Safety reads: CELL TOWER BASE \/ RADIO FREQUENCY AREA \/ AUTHORIZED PERSONNEL ONLY. Written for telecom contractors, utility crews, cell sites and fiber installers. Rust-resistant .065 aluminum, UV-resistant, pre-drilled for mounting. Made in the USA.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":67989831155956,"sku":"CGAP-D-CELLTOWERBASE-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/danger-cell-tower-base-sign-radio-frequency-area-8x12-aluminum-3318599.jpg?v=1793667141"},{"product_id":"warning-radar-cabinet-stored-power-sign-cgap-w13764-812","title":"WARNING Radar Cabinet Stored Power Sign – Capacitors Can Hold Voltage – 8x12 Aluminum","description":"\u003cp\u003eWARNING Radar Cabinet Stored Power sign for Radar \u0026amp; Communications. Capacitors Can Hold Voltage. This CGAP Safety WARNING sign reads: RADAR CABINET STORED POWER \/ CAPACITORS CAN HOLD VOLTAGE \/ ISOLATE AND VERIFY DISCHARGE \/ QUALIFIED SERVICE ACCESS ONLY. Written for Radar \u0026amp; Communications. Printed on 8x12 inch .065 aluminum with a rust-resistant, UV-resistant finish and four pre-drilled corner holes, made in the USA by CGAP Safety and backed by a five-year warranty against fading, peeling and rust. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e\u003ch3\u003eSign details\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCapacitors Can Hold Voltage: Reads RADAR CABINET STORED POWER \/ CAPACITORS CAN HOLD VOLTAGE \/ ISOLATE AND VERIFY DISCHARGE \/ QUALIFIED SERVICE ACCESS ONLY. Names the exact equipment and the exact hazard, so crews see the risk at a glance instead of tuning out a generic notice.\u003c\/li\u003e\n\u003cli\u003eWhy This Sign Matters: Capacitors Can Hold Voltage. Warning-level wording flags the hazard at the radar cabinet stored power and states what to do before the task starts, right where the risk is.\u003c\/li\u003e\n\u003cli\u003eWhere To Post It: Mount it at the radar cabinet stored power so it is read before work begins. Made for Radar \u0026amp; Communications.\u003c\/li\u003e\n\u003cli\u003eBuilt For Indoor And Outdoor Sites: Heavy-duty .065 aluminum with a rust-resistant, UV-resistant printed finish, backed by a five-year warranty against fading, peeling and rust. Sheds sun, rain and washdown.\u003c\/li\u003e\n\u003cli\u003eReady To Mount, Made In Usa: 8x12 inch landscape sign with four pre-drilled corner holes for screws, rivets or bolts. Mounts on doors, walls, fences, guards and equipment frames. Made by CGAP Safety.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68013724664052,"sku":"CGAP-W13764-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w13764-812.jpg?v=1793586826"},{"product_id":"danger-rf-glue-press-sign-8x12-aluminum","title":"DANGER RF Glue Press Sign – Radio Frequency Energy Can Burn – 8x12 Aluminum","description":"\u003cp\u003eRadio Frequency Energy Can Burn. This DANGER RF Glue Press sign from CGAP Safety reads: \u003cstrong\u003eRF GLUE PRESS \/ RADIO FREQUENCY ENERGY \/ CAN BURN DEEP \/ KEEP SHIELDS IN PLACE\u003c\/strong\u003e. Written for cabinet shops, millwork plants and furniture factories.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eHigh RF energy and voltage burn tissue deeply if shields are removed.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003ePress.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eFurniture plant operator.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.97. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68015499641076,"sku":"CGAP-D-RFGLUEPRESS-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-rfgluepress-812.jpg?v=1793596007"},{"product_id":"danger-earth-station-antenna-beam-sign-8x12-aluminum","title":"DANGER Earth Station Antenna Beam Sign – High Power RF in Front of the Dish – 8x12 Aluminum","description":"\u003cp\u003eHigh Power RF in Front of the Dish. This DANGER Earth Station Antenna Beam sign from CGAP Safety reads: \u003cstrong\u003eEARTH STATION ANTENNA \/ HIGH POWER RF BEAM \/ IN FRONT OF THIS DISH \/ STAY OUT WHILE TRANSMITTING\u003c\/strong\u003e. Written for satellite teleports, earth stations, broadcast uplink centers and government ground stations.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eThe uplink beam leaving the reflector is concentrated enough near the antenna to heat body tissue and burn, and it cannot be seen or felt until damage starts.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eOn the barrier or fence in front of the antenna.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eTeleport or earth station engineer, satellite operations manager, RF safety officer.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: FCC OET Bulletin 65; 47 CFR 1.1310; IEEE C95.1. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68015796846836,"sku":"CGAP-D-EARTHSTATIONANTENNABEA-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-earthstationantennabea-812.jpg?v=1793598817"},{"product_id":"danger-rooftop-uplink-antenna-sign-8x12-aluminum","title":"DANGER Rooftop Uplink Antenna Sign – Roof Workers Can Walk Into the Beam – 8x12 Aluminum","description":"\u003cp\u003eRoof Workers Can Walk Into the Beam. This DANGER Rooftop Uplink Antenna sign from CGAP Safety reads: \u003cstrong\u003eROOFTOP UPLINK ANTENNA \/ RF BEAM CROSSES THIS ROOF \/ CALL TELEPORT BEFORE \/ WORKING NEAR THE DISH\u003c\/strong\u003e. Written for broadcasters, enterprises with rooftop uplinks, hospitals and government buildings.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eRoofers and HVAC techs who do not know the dish transmits can walk or lift equipment into the beam path in front of a rooftop uplink.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eAt roof access doors and hatches near uplink dishes.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eBuilding engineer, broadcaster or enterprise network manager.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: FCC OET Bulletin 65; 47 CFR 1.1310; IEEE C95.1. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68015796879604,"sku":"CGAP-D-ROOFTOPUPLINKANTENNA-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-rooftopuplinkantenna-812.jpg?v=1793598819"},{"product_id":"danger-uplink-transmit-inhibit-sign-8x12-aluminum","title":"DANGER Uplink Transmit Inhibit Sign – Transmit Must Be Locked Off for Antenna Work – 8x12 Aluminum","description":"\u003cp\u003eTransmit Must Be Locked Off for Antenna Work. This DANGER Uplink Transmit Inhibit sign from CGAP Safety reads: \u003cstrong\u003eUPLINK TRANSMIT INHIBIT \/ LOCK OUT HPA TRANSMIT \/ BEFORE FEED OR DISH WORK \/ RF CAUSES DEEP BURNS\u003c\/strong\u003e. Written for satellite teleports, earth stations, broadcast uplink centers and government ground stations.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eWork on the feed, reflector or waveguide with the high power amplifier able to transmit can expose the worker to RF at levels that cause deep burns.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eAt the transmit inhibit switch and HPA rack.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eTeleport or earth station engineer, satellite operations manager, RF safety officer.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: FCC OET Bulletin 65; 47 CFR 1.1310; IEEE C95.1; OSHA 1910.147. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68015796912372,"sku":"CGAP-D-UPLINKTRANSMITINHIBIT-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-uplinktransmitinhibit-812.jpg?v=1793598820"},{"product_id":"danger-antenna-counterweight-swing-zone-sign-8x12-aluminum","title":"DANGER Antenna Counterweight Swing Zone Sign – Moving Antenna Can Crush You – 8x12 Aluminum","description":"\u003cp\u003eMoving Antenna Can Crush You. This DANGER Antenna Counterweight Swing Zone sign from CGAP Safety reads: \u003cstrong\u003eANTENNA COUNTERWEIGHT \/ MOVES AUTOMATICALLY \/ CAN CRUSH AGAINST MOUNT \/ STAY OUT WHILE IN TRACK\u003c\/strong\u003e. Written for satellite teleports, earth stations, broadcast uplink centers and government ground stations.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eTracking antennas move on their own, and the counterweight and elevation structure can sweep down and crush a worker against the pedestal or ground.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eOn the barrier around the antenna pedestal.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eTeleport or earth station engineer, satellite operations manager, RF safety officer.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.147; manufacturer antenna safety instructions. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68015797043444,"sku":"CGAP-D-ANTENNACOUNTERWEIGHTSW-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-antennacounterweightsw-812.jpg?v=1793598825"},{"product_id":"danger-antenna-hub-room-sign-8x12-aluminum","title":"DANGER Antenna Hub Room Sign – Antenna Can Move With You Inside – 8x12 Aluminum","description":"\u003cp\u003eAntenna Can Move With You Inside. This DANGER Antenna Hub Room sign from CGAP Safety reads: \u003cstrong\u003eANTENNA HUB ROOM \/ ANTENNA CAN MOVE \/ WITH YOU INSIDE \/ LOCK OUT DRIVES TO ENTER\u003c\/strong\u003e. Written for satellite teleports, earth stations, broadcast uplink centers and government ground stations.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eThe hub room rotates with the antenna, and a drive command while someone is inside can throw them against equipment or pinch them at the access.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eOn the hub room access hatch.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eTeleport or earth station engineer, satellite operations manager, RF safety officer.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.147; manufacturer antenna safety instructions. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68015797076212,"sku":"CGAP-D-ANTENNAHUBROOM-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-antennahubroom-812.jpg?v=1793598826"},{"product_id":"danger-antenna-azimuth-bull-gear-sign-8x12-aluminum","title":"DANGER Antenna Azimuth Bull Gear Sign – Gear Teeth Can Pull In Hands – 8x12 Aluminum","description":"\u003cp\u003eGear Teeth Can Pull In Hands. This DANGER Antenna Azimuth Bull Gear sign from CGAP Safety reads: \u003cstrong\u003eAZIMUTH BULL GEAR \/ TEETH PULL IN HANDS \/ ANTENNA MOVES ON ITS OWN \/ LOCK OUT BEFORE GREASING\u003c\/strong\u003e. Written for satellite teleports, earth stations, broadcast uplink centers and government ground stations.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eGreasing the azimuth bull gear puts hands at the pinion mesh, and an automatic tracking move can pull fingers into the teeth.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eOn the gear guard and pedestal access.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eTeleport or earth station engineer, satellite operations manager, RF safety officer.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.212; 1910.147. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68015797108980,"sku":"CGAP-D-ANTENNAAZIMUTHBULLGEAR-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-antennaazimuthbullgear-812.jpg?v=1793598828"},{"product_id":"danger-antenna-stow-pins-sign-8x12-aluminum","title":"DANGER Antenna Stow Pins Sign – Unpinned Antenna Can Swing in Wind – 8x12 Aluminum","description":"\u003cp\u003eUnpinned Antenna Can Swing in Wind. This DANGER Antenna Stow Pins sign from CGAP Safety reads: \u003cstrong\u003eANTENNA STOW PINS \/ UNPINNED DISH CAN SWING \/ IN WIND AND CRUSH \/ INSERT PINS BEFORE WORK\u003c\/strong\u003e. Written for satellite teleports, earth stations, broadcast uplink centers and government ground stations.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eWith drives off and brakes released for service, wind on a large reflector can swing it unless the stow pins are in.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eAt the stow pin locations on the pedestal.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eTeleport or earth station engineer, satellite operations manager, RF safety officer.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: Manufacturer antenna safety instructions; OSHA General Duty Clause. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68015797141748,"sku":"CGAP-D-ANTENNASTOWPINS-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-antennastowpins-812.jpg?v=1793598829"},{"product_id":"danger-antenna-elevation-brake-sign-8x12-aluminum","title":"DANGER Antenna Elevation Brake Sign – Releasing Brake Can Let Dish Rotate – 8x12 Aluminum","description":"\u003cp\u003eReleasing Brake Can Let Dish Rotate. This DANGER Antenna Elevation Brake sign from CGAP Safety reads: \u003cstrong\u003eELEVATION BRAKE \/ RELEASING CAN LET DISH \/ ROTATE UNDER ITS WEIGHT \/ PIN DISH BEFORE RELEASE\u003c\/strong\u003e. Written for satellite teleports, earth stations, broadcast uplink centers and government ground stations.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eAn antenna out of balance can rotate under its own weight when the elevation brake is released for a manual crank or motor change.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eOn the elevation drive and brake.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eTeleport or earth station engineer, satellite operations manager, RF safety officer.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: Manufacturer antenna safety instructions; OSHA 1910.147. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68015797174516,"sku":"CGAP-D-ANTENNAELEVATIONBRAKE-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-antennaelevationbrake-812.jpg?v=1793598830"},{"product_id":"danger-dish-snow-clearing-sign-8x12-aluminum","title":"DANGER Dish Snow Clearing Sign – Antenna Can Move While You Clear Snow – 8x12 Aluminum","description":"\u003cp\u003eAntenna Can Move While You Clear Snow. This DANGER Dish Snow Clearing sign from CGAP Safety reads: \u003cstrong\u003eDISH SNOW CLEARING \/ ANTENNA CAN MOVE \/ WHILE YOU ARE ON IT \/ STOW AND LOCK OUT FIRST\u003c\/strong\u003e. Written for satellite teleports, earth stations, broadcast uplink centers and government ground stations.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eStaff clearing snow from the reflector are on or under a dish that can track on its own, which can throw them off or crush them.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eOn the antenna barrier gate.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eTeleport or earth station engineer, satellite operations manager, RF safety officer.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.147. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68015797272820,"sku":"CGAP-D-DISHSNOWCLEARING-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-dishsnowclearing-812.jpg?v=1793598834"},{"product_id":"danger-radar-radome-entry-sign-8x12-aluminum","title":"DANGER Radar Radome Entry Sign – Rotating Antenna and RF Inside – 8x12 Aluminum","description":"\u003cp\u003eRotating Antenna and RF Inside. This DANGER Radar Radome Entry sign from CGAP Safety reads: \u003cstrong\u003eRADAR RADOME \/ ANTENNA ROTATES AND RADIATES \/ RF AND CRUSH HAZARD \/ LOCK OUT BEFORE ENTRY\u003c\/strong\u003e. Written for weather radar sites, airport surveillance radar sites and defense radar facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eInside the radome the antenna rotates and transmits high peak power RF, so entering without stopping it and locking out the transmitter risks RF burns and being struck.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eOn the radome access hatch.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eRadar site technician, FAA or weather service facility manager, airport radar contractor.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: FCC OET Bulletin 65; 47 CFR 1.1310; IEEE C95.1; OSHA 1910.147. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68015797338356,"sku":"CGAP-D-RADARRADOMEENTRY-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-radarradomeentry-812.jpg?v=1793598836"},{"product_id":"danger-radar-antenna-platform-sign-8x12-aluminum","title":"DANGER Radar Antenna Platform Sign – Rotating Antenna Can Strike You – 8x12 Aluminum","description":"\u003cp\u003eRotating Antenna Can Strike You. This DANGER Radar Antenna Platform sign from CGAP Safety reads: \u003cstrong\u003eRADAR ANTENNA PLATFORM \/ ROTATING ANTENNA \/ CAN STRIKE AND THROW YOU \/ STOP AND LOCK OUT TO ENTER\u003c\/strong\u003e. Written for weather radar sites, airport surveillance radar sites and defense radar facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eOpen surveillance radar antennas sweep the platform continuously and can strike and throw a worker off the tower.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eAt the platform access gate.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eRadar site technician, FAA or weather service facility manager, airport radar contractor.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.147; 1910.28. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68015797371124,"sku":"CGAP-D-RADARANTENNAPLATFORM-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-radarantennaplatform-812.jpg?v=1793598837"},{"product_id":"danger-radar-transmitter-modulator-sign-8x12-aluminum","title":"DANGER Radar Transmitter Modulator Sign – Lethal Pulse Voltage and Stored Charge – 8x12 Aluminum","description":"\u003cp\u003eLethal Pulse Voltage and Stored Charge. This DANGER Radar Transmitter Modulator sign from CGAP Safety reads: \u003cstrong\u003eRADAR MODULATOR \/ LETHAL PULSE VOLTAGE \/ CHARGE STAYS AFTER OFF \/ GROUND WITH HOOK FIRST\u003c\/strong\u003e. Written for weather radar sites, airport surveillance radar sites and defense radar facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eThe modulator stores energy in pulse networks and capacitors at lethal voltage, and they stay charged after the transmitter is shut down.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eOn modulator cabinet doors.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eRadar site technician, FAA or weather service facility manager, airport radar contractor.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: NFPA 70E; manufacturer service instructions. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68015797403892,"sku":"CGAP-D-RADARTRANSMITTERMODULA-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-radartransmittermodula-812.jpg?v=1793598839"},{"product_id":"danger-water-tower-antenna-zone-sign-8x12-aluminum","title":"DANGER Water Tower Antenna Zone Sign – Cellular Antennas Emit RF Energy – 8x12 Aluminum","description":"\u003cp\u003eCellular Antennas Emit RF Energy. This DANGER Water Tower Antenna Zone sign from CGAP Safety reads: \u003cstrong\u003eANTENNAS ON THIS TOWER \/ RF ENERGY CAN BURN \/ STAY BACK FROM ANTENNAS \/ CALL CARRIER TO POWER DOWN\u003c\/strong\u003e. Written for municipal water towers, elevated tanks and standpipes.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eWorkers on the tank roof near active cellular panels can exceed RF exposure limits and suffer internal heating and burns.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eAt the tower roof access and antenna platform.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eWater system operator, tank inspector, tower climber.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: FCC OET Bulletin 65; 47 CFR 1.1310. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68015817195764,"sku":"CGAP-D-WATERTOWERANTENNAZONE-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-watertowerantennazone-812.jpg?v=1793599457"},{"product_id":"danger-tower-antenna-mounts-sign-8x12-aluminum","title":"DANGER Tower Antenna Mounts Sign – Mount Pipes Are Not Rated Fall Anchors – 8x12 Aluminum","description":"\u003cp\u003eMount Pipes Are Not Rated Fall Anchors. This DANGER Tower Antenna Mounts sign from CGAP Safety reads: \u003cstrong\u003eANTENNA MOUNTS AND PIPES \/ ARE NOT RATED ANCHORS \/ A FALL CAN TEAR THEM OFF \/ TIE OFF TO RATED STEEL\u003c\/strong\u003e. Written for cell tower sites, broadcast and two-way radio towers, tower erection contractors.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eA climber who ties off to a mount pipe or antenna bracket falls when the arrest force bends or tears the mount loose.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eClimb point and on sector frame at antenna level.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eTower owner site manager, tower crew foreman, wireless carrier field ops.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1926.502(d)(15) anchorage strength; ANSI\/ASSP A10.48. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68016653107444,"sku":"CGAP-D-TOWERANTENNAMOUNTS-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-towerantennamounts-812.jpg?v=1793602049"},{"product_id":"danger-tower-antenna-platform-sign-8x12-aluminum","title":"DANGER Tower Antenna Platform Sign – Open Edges and Gaps Can Drop You – 8x12 Aluminum","description":"\u003cp\u003eOpen Edges and Gaps Can Drop You. This DANGER Tower Antenna Platform sign from CGAP Safety reads: \u003cstrong\u003eANTENNA PLATFORM \/ OPEN EDGES AND GAPS \/ A FALL CAN KILL \/ STAY TIED OFF ON PLATFORM\u003c\/strong\u003e. Written for cell tower sites, broadcast and two-way radio towers, tower erection contractors.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eMissing grating, open handrail sections and the access hole let a climber who unhooks step off the platform and fall to the ground.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003ePlatform access opening.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eTower owner site manager, tower crew foreman, wireless carrier field ops.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.28; 1926.502; ANSI\/ASSP A10.48. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68016653205748,"sku":"CGAP-D-TOWERANTENNAPLATFORM-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-towerantennaplatform-812.jpg?v=1793602053"},{"product_id":"danger-rooftop-broadcast-antenna-sign-8x12-aluminum","title":"DANGER Rooftop Broadcast Antenna Sign – High Power RF Can Burn – 8x12 Aluminum","description":"\u003cp\u003eHigh Power RF Can Burn. This DANGER Rooftop Broadcast Antenna sign from CGAP Safety reads: \u003cstrong\u003eBROADCAST ANTENNA \/ HIGH POWER RF \/ CAN BURN DEEP TISSUE \/ STAY OUT UNTIL POWER IS CUT\u003c\/strong\u003e. Written for cell tower sites, broadcast and two-way radio towers, tower erection contractors, urban rooftop sites.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eStanding near a high power broadcast antenna exposes the body to RF energy that heats tissue and can cause deep burns before pain is felt.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eRooftop barrier around broadcast antenna.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eTower owner site manager, tower crew foreman, wireless carrier field ops.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: FCC 47 CFR 1.1310; IEEE C95.1; ANSI C95.7. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68016654418164,"sku":"CGAP-D-ROOFTOPBROADCASTANTENN-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-rooftopbroadcastantenn-812.jpg?v=1793602084"},{"product_id":"danger-rooftop-antenna-ice-fall-sign-8x12-aluminum","title":"DANGER Rooftop Antenna Ice Fall Sign – Ice Sheds From Rooftop Antennas – 8x12 Aluminum","description":"\u003cp\u003eIce Sheds From Rooftop Antennas. This DANGER Rooftop Antenna Ice Fall sign from CGAP Safety reads: \u003cstrong\u003eICE FROM ANTENNAS ABOVE \/ CAN FALL ON WALKWAY \/ AND KILL \/ USE OTHER ENTRANCE WHEN ICED\u003c\/strong\u003e. Written for cell tower sites, broadcast and two-way radio towers, tower erection contractors, commercial buildings with rooftop leases.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eIce that builds on rooftop antennas and mounts sheds without warning and falls several stories onto people below.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eBuilding entrance or walkway below rooftop antennas.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eTower owner site manager, tower crew foreman, wireless carrier field ops.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: Industry practice; ANSI\/TIA-222 ice loading. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68016654450932,"sku":"CGAP-D-ROOFTOPANTENNAICEFALL-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-rooftopantennaicefall-812.jpg?v=1793602085"},{"product_id":"danger-rooftop-antenna-crane-lift-sign-8x12-aluminum","title":"DANGER Rooftop Antenna Crane Lift Sign – Antennas and Steel Can Fall From Roof – 8x12 Aluminum","description":"\u003cp\u003eAntennas and Steel Can Fall From Roof. This DANGER Rooftop Antenna Crane Lift sign from CGAP Safety reads: \u003cstrong\u003eCRANE LIFT OVERHEAD \/ ANTENNAS AND STEEL \/ CAN FALL FROM ROOF \/ KEEP OUT BELOW\u003c\/strong\u003e. Written for cell tower sites, broadcast and two-way radio towers, tower erection contractors, urban rooftop sites.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eA rigging or crane failure during a rooftop pick drops antennas or steel several stories onto the area below.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eSidewalk and lot below the lift.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eTower owner site manager, tower crew foreman, wireless carrier field ops.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1926.1425. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68016654483700,"sku":"CGAP-D-ROOFTOPANTENNACRANELIF-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-rooftopantennacranelif-812.jpg?v=1793602087"},{"product_id":"danger-rf-package-dryer-sign-8x12-aluminum","title":"DANGER RF Package Dryer Sign – RF Energy Can Burn – 8x12 Aluminum","description":"\u003cp\u003eRF Energy Can Burn. This DANGER RF Package Dryer sign from CGAP Safety reads: \u003cstrong\u003eRF PACKAGE DRYER \/ RADIO FREQUENCY ENERGY \/ CAN CAUSE DEEP BURNS \/ NEVER DEFEAT INTERLOCKS\u003c\/strong\u003e. Written for cotton and synthetic spinning mills, yarn plants and nonwoven fiber prep lines.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eRF energy leaking from open or damaged shielding heats body tissue and causes deep burns.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003edryer tunnel entrance.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eTextile mill maintenance supervisor, spinning and opening room manager.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: IEEE C95.1; OSHA 1910.97 practice. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68016675717364,"sku":"CGAP-D-RFPACKAGEDRYER-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-rfpackagedryer-812.jpg?v=1793602273"},{"product_id":"danger-rf-blister-sealer-sign-8x12-aluminum","title":"DANGER RF Blister Sealer Sign – RF Energy Burns and Press Crushes – 8x12 Aluminum","description":"\u003cp\u003eRF Energy Burns and Press Crushes. This DANGER RF Blister Sealer sign from CGAP Safety reads: \u003cstrong\u003eRF BLISTER SEALER \/ RF ENERGY CAN BURN \/ PRESS CAN CRUSH HANDS \/ HANDS OUT BEFORE SEALING\u003c\/strong\u003e. Written for retail packaging and medical device packaging.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eThe press closes with force while high frequency energy at the die burns tissue between the electrodes.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eAt the sealing press.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003epackaging maintenance lead, line supervisor, plant safety manager.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.97; manufacturer instructions. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68017014931700,"sku":"CGAP-D-RFBLISTERSEALER-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-rfblistersealer-812.jpg?v=1793606833"},{"product_id":"danger-aircraft-weather-radar-sign-8x12-aluminum","title":"DANGER Aircraft Weather Radar Sign – RF Energy Can Burn People and Ignite Fuel – 8x12 Aluminum","description":"\u003cp\u003eRF Energy Can Burn People and Ignite Fuel. This DANGER Aircraft Weather Radar sign from CGAP Safety reads: \u003cstrong\u003eWEATHER RADAR \/ RF ENERGY CAN BURN \/ NO TRANSMIT NEAR PEOPLE \/ OR DURING FUELING\u003c\/strong\u003e. Written for avionics shops, airline line stations, MROs and corporate flight departments.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eGround-transmitting radar can cause internal RF burns to people in front of the nose and ignite fuel vapor during fueling.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eAt avionics test areas and ramp radar test positions.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eAvionics shop lead, line maintenance supervisor.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: Aircraft maintenance manual radar hazard distances; NFPA 407. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68017498489076,"sku":"CGAP-D-AIRCRAFTWEATHERRADAR-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-aircraftweatherradar-812.jpg?v=1793612675"},{"product_id":"danger-am-antenna-tuning-unit-sign-8x12-aluminum","title":"DANGER AM Antenna Tuning Unit Sign – High RF Voltage on Coils and Straps – 8x12 Aluminum","description":"\u003cp\u003eHigh RF Voltage on Coils and Straps. This DANGER AM Antenna Tuning Unit sign from CGAP Safety reads: \u003cstrong\u003eANTENNA TUNING UNIT \/ HIGH RF VOLTAGE INSIDE \/ TRANSMITTER OFF AND \/ GROUND BEFORE OPENING\u003c\/strong\u003e. Written for AM, FM and TV broadcast transmitter sites and tower owners.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eCoils, capacitors and copper straps in the tower base tuning house carry high RF voltage and current that can arc to a hand and burn through tissue.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eATU cabinet and doghouse door.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eBroadcast chief engineer \/ transmitter site manager.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: 47 CFR 1.1307(b); FCC OET Bulletin 65; IEEE C95.7. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68017769447668,"sku":"CGAP-D-AMANTENNATUNINGUNIT-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-amantennatuningunit-812.jpg?v=1793614012"},{"product_id":"danger-fm-combiner-and-filter-cabinet-sign-8x12-aluminum","title":"DANGER FM Combiner and Filter Cabinet Sign – Open Covers Expose High RF Fields – 8x12 Aluminum","description":"\u003cp\u003eOpen Covers Expose High RF Fields. This DANGER FM Combiner and Filter Cabinet sign from CGAP Safety reads: \u003cstrong\u003eFM COMBINER CABINET \/ HIGH RF FIELDS INSIDE \/ DO NOT REMOVE COVERS \/ WHILE TRANSMITTING\u003c\/strong\u003e. Written for AM, FM and TV broadcast transmitter sites and tower owners.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eCombiner and filter cavities carry the full output of several transmitters, and opening a cover or port on the air exposes the hand and face to burning RF levels.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eCombiner and filter enclosure.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eBroadcast chief engineer \/ transmitter site manager.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: FCC OET Bulletin 65; 47 CFR 1.1307(b); IEEE C95.7. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68017769742580,"sku":"CGAP-D-FMCOMBINERANDFILTERCAB-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-fmcombinerandfiltercab-812.jpg?v=1793614033"},{"product_id":"danger-broadcast-tower-antenna-zone-sign-8x12-aluminum","title":"DANGER Broadcast Tower Antenna Zone Sign – Climbers Need Transmitter Power Reduced – 8x12 Aluminum","description":"\u003cp\u003eClimbers Need Transmitter Power Reduced. This DANGER Broadcast Tower Antenna Zone sign from CGAP Safety reads: \u003cstrong\u003eBROADCAST ANTENNAS ABOVE \/ HIGH RF NEAR ANTENNA BAYS \/ NO CLIMBING PAST THIS POINT \/ UNTIL POWER IS REDUCED\u003c\/strong\u003e. Written for AM, FM and TV broadcast transmitter sites and tower owners and tower companies.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eFM and TV antenna bays radiate far above exposure limits at close range, and a climber passing or touching them at full power can suffer RF burns and deep heating.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eTower ladder at the level below the antenna aperture.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eTower owner, tower climbing contractor and site manager.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: 47 CFR 1.1307(b); FCC OET Bulletin 65; ANSI\/ASSP A10.48. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68017769775348,"sku":"CGAP-D-BROADCASTTOWERANTENNAZ-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-broadcasttowerantennaz-812.jpg?v=1793614035"},{"product_id":"danger-satellite-uplink-antenna-feed-area-sign-8x12-aluminum","title":"DANGER Satellite Uplink Antenna Feed Area Sign – Never Stand Between Feed and Reflector – 8x12 Aluminum","description":"\u003cp\u003eNever Stand Between Feed and Reflector. This DANGER Satellite Uplink Antenna Feed Area sign from CGAP Safety reads: \u003cstrong\u003eSATELLITE UPLINK \/ NEVER STAND BETWEEN \/ FEED AND REFLECTOR \/ WHILE TRANSMITTING\u003c\/strong\u003e. Written for satellite teleports, earth stations, broadcast networks and cable headends.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eThe space between the feed horn and reflector carries the full transmit power in a small area, creating RF levels that can burn and damage eyes in seconds.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eAntenna base, ladder and reflector service platform.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eSatellite earth station engineer \/ teleport operations manager.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: FCC OET Bulletin 65 (earth station near-field analysis); 47 CFR 1.1307(b). A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68017769808116,"sku":"CGAP-D-SATELLITEUPLINKANTENNA-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-d-satelliteuplinkantenna-812.jpg?v=1793614036"},{"product_id":"warning-antenna-counterweight-sign-cgap-w00222-812","title":"WARNING Antenna Counterweight Sign – Counterweight Can Swing Down On Brake Release – 8x12 Aluminum","description":"\u003cp\u003eCounterweight Can Swing Down On Brake Release. This WARNING Antenna Counterweight sign from CGAP Safety reads: \u003cstrong\u003eANTENNA COUNTERWEIGHT PATH \/ COUNTERWEIGHT CAN SWING DOWN \/ IF DRIVE BRAKE IS RELEASED \/ STOW PIN AND LOCK OUT DRIVES \/ BEFORE BRAKE OR GEAR WORK\u003c\/strong\u003e. Written for satellite earth stations, teleports, radar sites.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eThe counterweight is held in place by the drive brakes, and if a brake is released during maintenance the counterweight can swing down and crush anyone below it.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eOn the antenna pedestal beside the counterweight access point.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eEarth station maintenance technicians.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.147; ANSI Z535.2. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68018406850804,"sku":"CGAP-W00222-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w00222-812.jpg?v=1793620611"},{"product_id":"warning-rooftop-antenna-access-edge-sign-cgap-w00280-812","title":"WARNING Rooftop Antenna Access Edge Sign – Fall From Roof Edge Near Mounts – 8x12 Aluminum","description":"\u003cp\u003eFall From Roof Edge Near Mounts. This WARNING Rooftop Antenna Access Edge sign from CGAP Safety reads: \u003cstrong\u003eROOFTOP ANTENNA ACCESS EDGE \/ FALL FROM ROOF EDGE CAN KILL \/ WHILE WORKING ON MOUNTS \/ USE REQUIRED FALL PROTECTION \/ PAST THIS POINT\u003c\/strong\u003e. Written for rooftop cell sites, microwave sites, building owners.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eAntenna mounts often sit at the roof edge, and a worker focused on the equipment can step back off the edge.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eAt the roof access door or hatch leading to the antenna area.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eWireless site managers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.28, 1910.29; ANSI Z535.2. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68018412814580,"sku":"CGAP-W00280-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w00280-812.jpg?v=1793620696"},{"product_id":"warning-antenna-azimuth-gear-ring-sign-cgap-w01022-812","title":"WARNING Antenna Azimuth Gear Ring Sign – Auto Track Can Turn Antenna Into Gears – 8x12 Aluminum","description":"\u003cp\u003eAuto Track Can Turn Antenna Into Gears. This WARNING Antenna Azimuth Gear Ring sign from CGAP Safety reads: \u003cstrong\u003eANTENNA AZIMUTH GEAR RING \/ AUTO TRACK CAN TURN ANTENNA \/ AND CRUSH FINGERS IN GEARS \/ LOCK OUT DRIVES TO LUBRICATE\u003c\/strong\u003e. Written for satellite earth stations, teleports, tracking stations.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eThe tracking controller can move the antenna at any time, and hands at the ring gear are drawn into the mesh with the drive pinion.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eOn the antenna pedestal at the azimuth gear access cover.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eEarth station technicians.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.147; ANSI Z535.2. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68018559156468,"sku":"CGAP-W01022-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w01022-812.jpg?v=1793623007"},{"product_id":"warning-base-antenna-rotation-sign-cgap-w01767-812","title":"WARNING Base Antenna Rotation Sign – Remote Command Can Swing Antenna – 8x12 Aluminum","description":"\u003cp\u003eRemote Command Can Swing Antenna. This WARNING Base Antenna Rotation sign from CGAP Safety reads: \u003cstrong\u003eBASE ANTENNA ROTATION \/ REMOTE COMMAND CAN SWING \/ ANTENNA INTO WORK AREA \/ LOCK OUT ROTATION BEFORE ACCESS\u003c\/strong\u003e. Written for military bases, radar sites, communications facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eThe antenna can be rotated from a remote operator, sweeping into anyone working on the platform.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eAt the platform access ladder or door to the antenna deck.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eMilitary facility maintenance and communications techs.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.147; ANSI Z535.2. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68018958991604,"sku":"CGAP-W01767-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w01767-812.jpg?v=1793624283"},{"product_id":"warning-dish-elevation-brake-sign-cgap-w01821-812","title":"WARNING Dish Elevation Brake Sign – Antenna Can Swing Under Gravity – 8x12 Aluminum","description":"\u003cp\u003eAntenna Can Swing Under Gravity. This WARNING Dish Elevation Brake sign from CGAP Safety reads: \u003cstrong\u003eDISH ELEVATION BRAKE RELEASE \/ ANTENNA CAN SWING UNDER GRAVITY \/ RESTRAIN DISH BEFORE RELEASING \/ KEEP CLEAR OF THE SWEEP PATH\u003c\/strong\u003e. Written for data centers, telecom.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eReleasing the elevation brake on an unrestrained dish lets it rotate under its own weight through the sweep path.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the antenna positioner housing beside the elevation brake release.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eSafety manager or maintenance supervisor at satellite earth stations.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.147; ANSI Z535.2. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68019200524532,"sku":"CGAP-W01821-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w01821-812.jpg?v=1793626722"},{"product_id":"warning-emc-antenna-mast-sign-cgap-w02440-812","title":"WARNING EMC Antenna Mast Sign – Mast Can Lower On Hands – 8x12 Aluminum","description":"\u003cp\u003eMast Can Lower On Hands. This WARNING EMC Antenna Mast sign from CGAP Safety reads: \u003cstrong\u003eEMC ANTENNA MAST SERVICE \/ MAST CAN LOWER ON HANDS \/ LOCK OUT AND SECURE CARRIAGE \/ BEFORE RELEASING LIFT HARDWARE\u003c\/strong\u003e. Written for power and emc test laboratories, test labs \u0026amp; r\u0026amp;d test facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eA raised carriage can slide down when lift hardware is released.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eOn the mast base near the lift hardware.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eEHS or maintenance manager at power and emc test laboratories.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.147; ANSI Z535.2. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68019438616820,"sku":"CGAP-W02440-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w02440-812.jpg?v=1793627564"},{"product_id":"warning-emc-antenna-mast-carriage-sign-cgap-w03240-812","title":"WARNING EMC Antenna Mast Carriage Sign – Antenna Can Fall If Unsupported – 8x12 Aluminum","description":"\u003cp\u003eAntenna Can Fall If Unsupported. This WARNING EMC Antenna Mast Carriage sign from CGAP Safety reads: \u003cstrong\u003eEMC ANTENNA MAST CARRIAGE \/ ANTENNA CAN FALL IF UNSUPPORTED \/ SUPPORT BEFORE DRIVE SERVICE \/ KEEP OUT FROM UNDER ANTENNA\u003c\/strong\u003e. Written for EMC test labs, anechoic chambers, electronics test facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eThe carriage and antenna hang from the drive. Servicing the drive without support can let the antenna fall onto a person below.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the mast base and the chamber wall at the carriage drive.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eEMC lab managers, test technicians, facility maintenance leads.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.184; ANSI Z535.2. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68019801751796,"sku":"CGAP-W03240-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w03240-812.jpg?v=1793629632"},{"product_id":"warning-radar-pedestal-gear-service-sign-cgap-w03863-812","title":"WARNING Radar Pedestal Gear Service Sign – Antenna Can Rotate Remotely – 8x12 Aluminum","description":"\u003cp\u003eAntenna Can Rotate Remotely. This WARNING Radar Pedestal Gear Service sign from CGAP Safety reads: \u003cstrong\u003eRADAR PEDESTAL GEAR SERVICE \/ ANTENNA CAN ROTATE REMOTELY \/ LOCK OUT AND RESTRAIN ROTATION \/ BEFORE PEDESTAL GEAR ACCESS\u003c\/strong\u003e. Written for Military installations, airfields, range control facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eA remote or automatic rotation command can turn the antenna while a technician is in the pedestal, crushing or shearing limbs in the drive gearing.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the pedestal access door and on the base of the radome platform ladder, facing anyone entering the gear compartment.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eRadar maintenance technicians, facility maintenance supervisors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.147; ANSI Z535.2. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68019970310388,"sku":"CGAP-W03863-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w03863-812.jpg?v=1793632841"},{"product_id":"warning-antenna-mast-height-drive-sign-cgap-w04036-812","title":"WARNING Antenna Mast Height Drive Sign – Carriage Can Fall During Service – 8x12 Aluminum","description":"\u003cp\u003eCarriage Can Fall During Service. This WARNING Antenna Mast Height Drive sign from CGAP Safety reads: \u003cstrong\u003eANTENNA MAST HEIGHT DRIVE \/ CARRIAGE CAN FALL DURING SERVICE \/ BLOCK CARRIAGE, LOCK OUT DRIVE \/ BEFORE LIFT BELT REMOVAL\u003c\/strong\u003e. Written for Power and EMC test labs, antenna ranges, compliance labs.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eOnce the lift belt is removed the antenna carriage can drop down the mast and strike the person working below it.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the mast base beside the drive cover, facing the technician.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eEMC lab manager, test engineer, lab safety officer.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.147; ANSI Z535.2; OSHA 1910.147. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68019985842420,"sku":"CGAP-W04036-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w04036-812.jpg?v=1793633111"},{"product_id":"warning-dish-stow-pin-withdrawal-sign-cgap-w04222-812","title":"WARNING Dish Stow Pin Withdrawal Sign – Antenna Can Move When Pin Frees – 8x12 Aluminum","description":"\u003cp\u003eAntenna Can Move When Pin Frees. This WARNING Dish Stow Pin Withdrawal sign from CGAP Safety reads: \u003cstrong\u003eDISH STOW PIN WITHDRAWAL \/ ANTENNA CAN MOVE WHEN PIN FREES \/ ISOLATE DRIVES AND SECURE DISH \/ BEFORE WITHDRAWING THE STOW PIN\u003c\/strong\u003e. Written for satellite earth stations, teleports, broadcast facilities.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eA driven dish held by a stow pin can swing when the pin is withdrawn, crushing hands in the pedestal and drive gear.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eOn the antenna pedestal next to the stow pin location.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eEarth station technicians, teleport engineers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.147; ANSI Z535.2. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68020620624116,"sku":"CGAP-W04222-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w04222-812.jpg?v=1793641167"},{"product_id":"warning-rooftop-antenna-ballast-sign-cgap-w04280-812","title":"WARNING Rooftop Antenna Ballast Sign – Array Can Tip If Ballast Moves – 8x12 Aluminum","description":"\u003cp\u003eArray Can Tip If Ballast Moves. This WARNING Rooftop Antenna Ballast sign from CGAP Safety reads: \u003cstrong\u003eROOFTOP ANTENNA BALLAST \/ ARRAY CAN TIP IF BALLAST MOVES \/ DO NOT REMOVE BALLAST WITHOUT \/ APPROVED STABILITY PLAN\u003c\/strong\u003e. Written for rooftop antenna sites, wireless carriers, commercial buildings.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eA nonpenetrating mount depends on its ballast to stay upright, so moving blocks can let the antenna tip over.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eOn the antenna mount frame next to the ballast blocks.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eRooftop site managers, wireless site technicians.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.147; OSHA 1910.184. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68020639498484,"sku":"CGAP-W04280-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w04280-812.jpg?v=1793641258"},{"product_id":"warning-antenna-counterbalance-link-sign-cgap-w04970-812","title":"WARNING Antenna Counterbalance Link Sign – Weight Can Drop As Link Frees – 8x12 Aluminum","description":"\u003cp\u003eWeight Can Drop As Link Frees. This WARNING Antenna Counterbalance Link sign from CGAP Safety reads: \u003cstrong\u003eANTENNA COUNTERBALANCE LINK \/ WEIGHT CAN DROP AS LINK FREES \/ BLOCK WEIGHT AND ISOLATE DRIVES \/ BEFORE DISCONNECTING LINKAGE\u003c\/strong\u003e. Written for Defense radar and communications sites, base facility maintenance.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eA large antenna is balanced by a counterweight. Disconnecting the link unloads that balance and lets the weight or the antenna move suddenly.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the pedestal housing at the counterbalance link access panel.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eAntenna mechanical technicians.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.147; ANSI Z535.2. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68020833550580,"sku":"CGAP-W04970-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w04970-812.jpg?v=1793642174"},{"product_id":"warning-antenna-platform-grating-lift-sign-cgap-w05073-812","title":"WARNING Antenna Platform Grating Lift Sign – Removed Panel Opens A Fall Path – 8x12 Aluminum","description":"\u003cp\u003eRemoved Panel Opens A Fall Path. This WARNING Antenna Platform Grating Lift sign from CGAP Safety reads: \u003cstrong\u003eANTENNA PLATFORM GRATING LIFT \/ REMOVED PANEL OPENS A FALL PATH \/ INSTALL FALL CONTROLS FIRST \/ GUARD OPENING \/ UNTIL PANEL RETURNS\u003c\/strong\u003e. Written for Telecom towers, antenna platforms, rooftop sites.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eA removed grating panel opens a hole at height on the antenna platform, creating a fall path for anyone crossing it.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the platform guardrail beside the lifted grating panel.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eTower climbers and erection crews.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.28; ANSI Z535.2. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68021891694836,"sku":"CGAP-W05073-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w05073-812.jpg?v=1793647106"},{"product_id":"warning-water-tower-antenna-hatch-sign-cgap-w05079-812","title":"WARNING Water Tower Antenna Hatch Sign – Open Hatch Leaves A Fall Path – 8x12 Aluminum","description":"\u003cp\u003eOpen Hatch Leaves A Fall Path. This WARNING Water Tower Antenna Hatch sign from CGAP Safety reads: \u003cstrong\u003eWATER TOWER ANTENNA HATCH \/ OPEN HATCH LEAVES A FALL PATH \/ SECURE HATCH AND GUARD OPENING \/ USE REQUIRED FALL PROTECTION\u003c\/strong\u003e. Written for Water tank antenna sites, elevated tank roofs.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eAn open hatch on a tank roof leaves a fall path into the opening.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the hatch frame or adjacent roof rail.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eAntenna technicians.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.28; ANSI Z535.2. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68021896249588,"sku":"CGAP-W05079-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w05079-812.jpg?v=1793647115"},{"product_id":"warning-radar-antenna-drive-sign-cgap-w05437-812","title":"WARNING Radar Antenna Drive Sign – Antenna Can Rotate Remotely – 8x12 Aluminum","description":"\u003cp\u003eAntenna Can Rotate Remotely. This WARNING Radar Antenna Drive sign from CGAP Safety reads: \u003cstrong\u003eRADAR ANTENNA DRIVE ACCESS \/ ANTENNA CAN ROTATE REMOTELY \/ ISOLATE AND SECURE ANTENNA \/ BEFORE ENTERING THE DRIVE AREA\u003c\/strong\u003e. Written for Airports, Air traffic facilities, NAVAID sites.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eA radar drive can be commanded remotely and rotate the antenna into a person in the pedestal.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eOn the antenna pedestal access door, facing the technician entering the drive area.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eNAVAID technician, Airport electronics supervisor.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.147; ANSI Z535.2. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68022036332788,"sku":"CGAP-W05437-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w05437-812.jpg?v=1793647630"},{"product_id":"warning-antenna-stow-pin-removal-sign-cgap-w05823-812","title":"WARNING Antenna Stow Pin Removal Sign – Wind Can Drive Released Antenna – 8x12 Aluminum","description":"\u003cp\u003eWind Can Drive Released Antenna. This WARNING Antenna Stow Pin Removal sign from CGAP Safety reads: \u003cstrong\u003eANTENNA STOW PIN REMOVAL \/ WIND CAN DRIVE RELEASED ANTENNA \/ SECURE ANTENNA BEFORE UNPINNING \/ KEEP CLEAR OF ITS SWING PATH\u003c\/strong\u003e. Written for Satellite earth stations.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eWind can drive a released antenna through its swing path and strike a technician.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the dish pedestal beside the stow pin.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eEarth station technicians.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.147; ANSI Z535.2. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68023215096052,"sku":"CGAP-W05823-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w05823-812.jpg?v=1793650620"},{"product_id":"warning-rooftop-antenna-radome-panels-sign-cgap-w05880-812","title":"WARNING Rooftop Antenna Radome Panels Sign – Loose Panels Can Blow Off Roof – 8x12 Aluminum","description":"\u003cp\u003eLoose Panels Can Blow Off Roof. This WARNING Rooftop Antenna Radome Panels sign from CGAP Safety reads: \u003cstrong\u003eROOFTOP ANTENNA RADOME PANELS \/ LOOSE PANELS CAN BLOW OFF ROOF \/ SECURE PANELS DURING REMOVAL \/ KEEP PEOPLE OUT OF DROP ZONE\u003c\/strong\u003e. Written for rooftop antenna sites, cell sites.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eWind can catch unsecured radome panels and carry them off the roof onto people and vehicles below.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eAt the roof access door and on the antenna platform railing near the radome.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eRooftop site technicians, antenna installers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1926.501; ANSI Z535.2. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68023225254132,"sku":"CGAP-W05880-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w05880-812.jpg?v=1793650695"},{"product_id":"warning-rooftop-antenna-ballast-sign-cgap-w06680-812","title":"WARNING Rooftop Antenna Ballast Sign – Ballast Removal Can Destabilize Frame – 8x12 Aluminum","description":"\u003cp\u003eBallast Removal Can Destabilize Frame. This WARNING Rooftop Antenna Ballast sign from CGAP Safety reads: \u003cstrong\u003eROOFTOP ANTENNA BALLAST \/ REMOVAL CAN DESTABILIZE FRAME \/ FOLLOW ENGINEERED REMOVAL PLAN \/ DO NOT MOVE BALLAST PIECES\u003c\/strong\u003e. Written for Rooftop antenna sites, telecom rooftop installations.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eAntenna frames on ballast depend on the weight for stability. Removing ballast pieces lets the frame shift or tip in wind.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eOn the rooftop antenna frame near the ballast blocks.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eRooftop site technicians, tower contractors.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1910.176; ANSI Z535.4. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68023528816884,"sku":"CGAP-W06680-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w06680-812.jpg?v=1793652709"},{"product_id":"warning-rooftop-antenna-cable-route-sign-cgap-w07480-812","title":"WARNING Rooftop Antenna Cable Route Sign – Cable Can Pull You Toward the Edge – 8x12 Aluminum","description":"\u003cp\u003eCable Can Pull You Toward the Edge. This WARNING Rooftop Antenna Cable Route sign from CGAP Safety reads: \u003cstrong\u003eROOFTOP ANTENNA CABLE ROUTE \/ CABLE CAN PULL YOU TOWARD EDGE \/ SECURE CABLE BEFORE FEEDING \/ USE REQUIRED FALL PROTECTION\u003c\/strong\u003e. Written for Rooftop wireless sites, building rooftops, telecom colocation sites.\u003c\/p\u003e\u003ch3\u003eWhy this sign matters\u003c\/h3\u003e\u003cp\u003eA cable being hauled or fed over the roof edge can snag or run away and pull a person toward the unprotected edge. Without anchored fall protection the person can go over the edge.\u003c\/p\u003e\u003ch3\u003eWhere to post it\u003c\/h3\u003e\u003cp\u003eMount on the parapet or access hatch frame next to the point where antenna coax is fed over the roof edge.\u003c\/p\u003e\u003ch3\u003eWho orders it\u003c\/h3\u003e\u003cp\u003eRooftop site technicians, tower crew foremen, wireless site managers.\u003c\/p\u003e\u003cp\u003eRust-resistant .065 aluminum, UV-resistant print, pre-drilled in all four corners. Made in the USA. Related standards to review for your site: OSHA 1926.502; ANSI Z359; ANSI Z535.2. A sign supports your safety program; it does not replace guarding, lockout or training.\u003c\/p\u003e","brand":"CGAP Industries","offers":[{"title":"Default Title","offer_id":68023753343220,"sku":"CGAP-W07480-812","price":29.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0788\/2771\/6852\/files\/cgap-w07480-812.jpg?v=1793655779"}],"url":"https:\/\/cgapindustries.com\/collections\/rf-radiation-antenna-signs.oembed","provider":"CGAP Safety","version":"1.0","type":"link"}