Anchor Point Label — 5,000 lb Minimum (3″ × 5″, Waterproof • Write-On • Peel & Stick)

Anchor Point Label — 5,000 lb Minimum (3″ × 5″)

Mark, identify, and document fall-protection anchors. This high-visibility write-on label from CGAP Industries helps crews verify anchor location and record inspections before tying off. Built on waterproof, chemical-resistant film with permanent adhesive, it stands up to real jobsite conditions and supports OSHA fall-protection programs.

Why it matters

• Compliance support: Reinforces the common 5,000 lb per-worker anchor strength requirement and makes inspections traceable.
• Point-of-use documentation: Lines for Inspection Date, Inspected By, Location ID, and Next Due Date.
• Built for the job: Printed on waterproof polyester (laser) with permanent adhesive; writeable with Sharpie/paint pen.
• Zero-tool install: Clean surface → peel → stick. Include an alcohol wipe for fast prep.

Specs

• Size: 3″ × 5″ (industry-standard anchor label footprint)
• Material: Matte waterproof polyester film (laser-printed) • Permanent acrylic adhesive
• Finish: High-contrast yellow header / black text for visibility
• Use on: Roof anchors, fixed tie-off points, beams, davits, and overhead anchor plates

Placement & use

Apply adjacent to the permanent anchor or directly on the anchor base/cover where permitted. Record the initial inspection and next due date at install; update after periodic inspections.

CGAP Industries — Close The Gap. Practical, job-ready labels that keep teams compliant and inspection-ready.