Danger Underground Street Light Circuit Sign – Electrocution Hazard, Call 811 Before You Dig, 8x12 Rust-Resistant Aluminum Utility Safety Sign by CGAP Safety

Street lighting looks harmless until someone hits the feeder. Underground street light circuits can remain energized, can be poorly documented, and can be located exactly where crews want to trench, bore, set posts, or install signage. When a buried electrical circuit is struck, it is not just an outage problem. It is an electrocution and flash hazard problem.

The CGAP Safety “Danger – Underground Street Light Circuit – Electrocution Hazard – Call 811 Before You Dig” sign is a high-visibility marker for areas where buried street light electrical circuits may be present. The bold DANGER header and direct wording are designed to interrupt the most common failure mode: someone assumes it’s low risk and starts digging, boring, or driving anchors without confirming what’s below grade.

The “Call 811 Before You Dig” instruction supports standard damage-prevention workflow by prompting coordination with the one-call system before ground disturbance begins. In practical terms, it helps reduce cable strikes, unplanned outages, emergency response incidents, and costly repair cycles caused by avoidable hits.

This 8 x 12 inch sign is manufactured from rust-resistant aluminum for long-term indoor/outdoor use along rights-of-way, municipal corridors, roadway projects, facility grounds, parking lots, and streetscape installations. The rigid aluminum construction outlasts thin plastic markers and temporary notices that fade, crack, or disappear after weather exposure.

Use this sign as part of your underground utility awareness and excavation safety program to keep crews aligned with locate-and-verify procedures before trenching, directional boring, augering, grading, or post installation.

Important: This product is a warning sign only and does not replace required locating, permitting, training, PPE, or utility-owner requirements. Always follow applicable codes, site policies, and safe digging practices, and coordinate with 811 and the responsible utility owner before excavation.

CGAP Safety is an American safety manufacturer dedicated to straightforward, durable signage that helps teams close the gap between written policy and what actually happens in the field.

• UNDERGROUND STREET LIGHT CIRCUIT WARNING SIGN – “Danger / Underground Street Light Circuit / Electrocution Hazard / Call 811 Before You Dig” clearly identifies an energized underground electrical hazard before excavation begins.
• ELECTROCUTION HAZARD MESSAGE THAT FITS “DANGER” – Designed for real consequences: a strike, cut, or exposed conductor can create lethal shock risk for workers, bystanders, and equipment operators.
• 811 DAMAGE-PREVENTION PROMPT – Reinforces locate-before-you-dig procedures to reduce strikes during trenching, boring, augering, post driving, sign installation, landscaping, and road/ROW work.
• 8x12 RUST-RESISTANT ALUMINUM – Rigid 8 x 12 inch sign manufactured from rust-resistant aluminum for long-term outdoor use in easements, rights-of-way, streetscapes, and facility grounds.
• HIGH-VISIBILITY OSHA-STYLE LAYOUT – Bold DANGER header and large block lettering improve recognition and readability at a distance in active work zones and high-traffic areas.
• MADE BY AN AMERICAN SAFETY MANUFACTURER – Produced by CGAP Safety, an American safety manufacturer focused on durable materials and compliance-minded messaging for field and municipal environments.