Construction Site Sign Checklist: Every Safety Sign a Jobsite Needs
Walk your jobsite from the gate in and check off each area below. Most sites need 10 to 20 signs, and the gaps usually show up at the entrance, around overhead work and at fuel and electrical setups.
1. Site entrance and fence line
- ☐ Hard hat area sign
- ☐ Authorized personnel only sign
- ☐ All visitors check in sign
- ☐ PPE required beyond this point sign
- ☐ No trespassing construction site sign
2. Overhead work, cranes and lifts
- ☐ Overhead hazard sign
- ☐ Crane swing radius sign
- ☐ Stay clear of suspended loads sign
- ☐ Aerial lift in use sign
3. Excavations, trenches and fall edges
4. Fuel, power and hot work
- ☐ No smoking flammable sign
- ☐ Fuel storage area sign
- ☐ High voltage keep out sign
- ☐ Hot work area sign
5. Job trailer and first aid
- ☐ First aid station sign
- ☐ Fire extinguisher sign
- ☐ Emergency contact numbers sign
- ☐ Eye wash station sign
Rules worth knowing
- OSHA 1926.200 covers accident prevention signs on construction sites. DANGER signs mark immediate hazards and CAUTION signs mark potential hazards.
- Signs must be visible when work is going on and removed or covered once the hazard is gone.
- Use signs alongside barricades and training, not in place of them.
This checklist is a starting point, not legal advice. Check the OSHA standard and your local code for your exact situation.
Common questions
How many signs does a small jobsite need?
Most small residential and light commercial sites need 10 to 20. Start with the entrance, PPE, overhead and fall hazard signs, then add fuel and electrical signs where they apply.
Are aluminum signs better than plastic on a jobsite?
Aluminum holds up to weather, sun and being moved from site to site, and it can be screwed or zip tied to fence and posts.
Shop the signs
Browse every sign in this collection, or let the site sign planner build the full list for you. All CGAP signs are 8x12 rust-resistant aluminum, pre-drilled and made in the USA.
From the blog: Safety Sign Basics
-
Aluminum, Plastic, or Vinyl: Choosing a Safety ...
Outdoors, a safety sign fights sun, rain, heat, and cold. How aluminum, plastic, and vinyl hold up, and how to mount a sign so it stays readable.
Aluminum, Plastic, or Vinyl: Choosing a Safety ...
Outdoors, a safety sign fights sun, rain, heat, and cold. How aluminum, plastic, and vinyl hold up, and how to mount a sign so it stays readable.
-
DANGER, WARNING, or CAUTION: How to Pick the Ri...
The word across the top of a safety sign makes a specific claim about the hazard. Here is what DANGER, WARNING, and CAUTION each mean, and two questions that pick...
DANGER, WARNING, or CAUTION: How to Pick the Ri...
The word across the top of a safety sign makes a specific claim about the hazard. Here is what DANGER, WARNING, and CAUTION each mean, and two questions that pick...
-
Why Safety Signs Matter More Than You Think (Es...
Small shops rarely skip safety signs on purpose. Here is what a sign actually does, what OSHA expects, and the five spots small shops get written up for most.
Why Safety Signs Matter More Than You Think (Es...
Small shops rarely skip safety signs on purpose. Here is what a sign actually does, what OSHA expects, and the five spots small shops get written up for most.