Manufacturing Plant Sign Checklist: Safety Signs for the Production Floor
A production floor needs signs at each machine, each PPE zone change and each place energy is stored. Use this list area by area.
1. Machines and moving parts
- ☐ Moving parts keep hands clear sign
- ☐ Pinch point sign
- ☐ Machine guard must be in place sign
- ☐ Authorized operators only sign
2. Lockout and maintenance
- ☐ Lockout tagout required sign
- ☐ Do not operate sign
- ☐ Energy isolation point sign
- ☐ Stored energy sign
3. PPE zones
- ☐ Hearing protection required sign
- ☐ Safety glasses required sign
- ☐ Steel toe boots required sign
- ☐ Respirator required sign
4. Chemicals and compressed gas
5. Electrical and utility rooms
- ☐ High voltage sign
- ☐ Arc flash sign
- ☐ Authorized personnel only sign
- ☐ Keep clear electrical panel sign
Rules worth knowing
- OSHA 1910.145 sets the sign classes: DANGER for immediate hazards, CAUTION for potential hazards, and safety instruction signs for general practices.
- Lockout tagout under 1910.147 requires energy control procedures. Signs remind workers but do not replace locks and tags.
- Machine guarding is required under 1910.212. A sign never substitutes for a missing guard.
This checklist is a starting point, not legal advice. Check the OSHA standard and your local code for your exact situation.
Common questions
What color should machine warning signs be?
Use DANGER (red) where contact would cause serious injury right away, and CAUTION (yellow) for potential hazards like pinch points.
Do PPE signs need to be at every entrance?
Post them at each entrance to a zone where the PPE requirement changes, so people see it before they walk in.
Shop the signs
Browse every sign in this collection, or let the site sign planner build the full list for you. All CGAP signs are 8x12 rust-resistant aluminum, pre-drilled and made in the USA.
From the blog: Safety Sign Basics
-
Aluminum, Plastic, or Vinyl: Choosing a Safety ...
Outdoors, a safety sign fights sun, rain, heat, and cold. How aluminum, plastic, and vinyl hold up, and how to mount a sign so it stays readable.
Aluminum, Plastic, or Vinyl: Choosing a Safety ...
Outdoors, a safety sign fights sun, rain, heat, and cold. How aluminum, plastic, and vinyl hold up, and how to mount a sign so it stays readable.
-
DANGER, WARNING, or CAUTION: How to Pick the Ri...
The word across the top of a safety sign makes a specific claim about the hazard. Here is what DANGER, WARNING, and CAUTION each mean, and two questions that pick...
DANGER, WARNING, or CAUTION: How to Pick the Ri...
The word across the top of a safety sign makes a specific claim about the hazard. Here is what DANGER, WARNING, and CAUTION each mean, and two questions that pick...
-
Why Safety Signs Matter More Than You Think (Es...
Small shops rarely skip safety signs on purpose. Here is what a sign actually does, what OSHA expects, and the five spots small shops get written up for most.
Why Safety Signs Matter More Than You Think (Es...
Small shops rarely skip safety signs on purpose. Here is what a sign actually does, what OSHA expects, and the five spots small shops get written up for most.